英国留学生科技哲学dissertation定制：Interactive Augment

Interactive Augmented Reality
byJames R Vallino
Submitted in Partial Fulfillment
of theRequirements for the Degree
Doctor of Philosophy
Supervised by
Professor Christopher M Brown
Department of Computer Science
The College
Arts and Sciences
University of Rochester
Rochester, New York
1998
Dedication
To my father.
One of the gentlest men I’ve known.
He taught me to always keep looking.
iv
Curriculum Vitae
The author was born in Forest Hills, New York on 26 June 1954. He attended
the Cooper Union for the Advancement of Arts and Science from 1971 to 1975, and
graduated with a Bachelor of Engineering degree in Mechanical Engineering in 1975.He then attended the University of Wisconsin - Madison from 1975 to 1976, andreceived a Master of Science degree in Electrical Engineering in 1976. From 1976until 1993 he held several positions in industry at AT&T Bell Laboratories, AudioVisual Labs and Siemens Corporate Research. He came to the University 英国留学生科技哲学dissertation定制ofRochester in the Fall of 1993 and began graduate studies in Computer Science. Hepursued his research in augmented reality under the direction of Professor ChristopherBrown and received the Master of Science degree in Computer Science in 1995.
Acknowledgments
I must start by acknowledging the person who has been my closest companionthrough this doctoral experience, Charlene Varnis. Without her emotional andfinancial support I question whether I would have undertaken this journey. She pickedup my slack when I had no time, said the right things to keep me going when I wasdown, and made sure that someone was taking care of me when I wasn't doing itmyself.
And to my friends Marty and Sue. Even though I see them rarely now thatmiles separate us, they were on this journey too. They don't know how many timesmy sanity was saved by viewing the "Wall of Shame" or letting my mind wander backto the Grand Canyon, Switzerland, the Adirondaks or any of the other numerousplaces we have hiked, biked, skied, laughed and generally enjoyed each other's goodcompany.
This thesis is the achievement of a long time goal of mine. I would like tothank my travelling companions Maureen, Art and Bill who were with me through theSummer of 1996 when I achieved another long time goal—bicycling across the U.S.Accomplishing that goal launched me into the final leg of this one.My parents are responsible for laying the foundation upon which this work is
built. I can not thank them enough for that. Even though my father is no longer hereto witness this, I am sure that he is looking down with a smile and carefully checking
my work to make sure I didn't leave any "holidays".Your advisor is the person who leads you through the Ph.D. gauntlet. I couldnot ask for a better leader than my advisor, Chris Brown. Our discussions kept meheaded in the right direction and gave me the motivation to continue when I wanted tofold up my tent. His confidence and loyalty were unwavering.#p#分页标题#e#
It is only occasionally that you come in contact with a truly creative personwho is a wellspring of interesting, and challenging ideas. Fortunately for me, KyrosKutulakos is such a person and one of his ideas was the spark for this thesis work. Hisassistance could not have been replaced especially during the early part of my workwhen I was clueless about affine geometry.
I would like to thank the other members of my committee, Dana Ballard,Randal Nelson and Murat Tekalp, for their insights and suggestions that have helped
shape this work. And finally, I want to thank the students who started with me back inSeptember of 1993—Garbis, Mark, Zaki, Wagner, Aaron, Colm, Umesh, Mauricio,Mike and Terry. All of them did not make it through this entire process. But alongthe way having someone with whom I could share my ups, downs, frustrations,
accomplishments, and failures made the experience more interesting, challenging,exciting, fun and tolerable for me.
I would like to express grateful appreciation to the following people who havegiven me permission to include images from their work in this thesis:
Figure 5 and Figure 11 - European Computer-Industry Research Centre(ECRC), Fraunhofer Institute for Computer Graphics (IGD),
Department Visualization & Virtual Reality (A4), Group forAugmented Reality at ZGDV - work supported by Ove Arup &
Partners and Sir Norman Foster & Partners, UK
Figure 7 - Dr. Eric Grimson, Computer Vision Group, MIT AI Lab
Figure 8 - Courtesy of the Department of Computer Science, University of
North Carolina at Chapel Hill
Figure 9 - Dr. Simon Gibbs, GMD - German National Research Center for
Information Technology
Figure 12 - Anu Rastogi, Dr. Paul Milgram, Dr. Julius Grodski, University of
Toronto - work sponsored by the Defence and Civil Institute of
Environmental Medicine, Department of National Defence, Canada
Figure 13 - Copyright 1993 by Steven Feiner, Blair MacIntyre, and Doree
Seligmann, Columbia University
Figure 14a - Ulrich Neumann and Youngkwan Cho, Computer Science
Department, University of Southern California
Figure 14b - Dr. David Mizell, The Boeing Company
This material is based upon work supported by the National Science
Foundation under grant numbers IRI-9306454 and IRI-9406481 and by the National
Institutes of Health under grant number 1 P41 RR 09283. Any opinions, findings, and
conclusions or recommendations expressed in this material are those of the author and
do not necessarily reflect the views of the NSF or the NIH.
vii
Abstract
Augmented reality is the merging of synthetic sensory information into a user’sperception of a real environment. Until recently, it has presented a passive interface toits human users, who were merely viewers of the scene augmented only with visualinformation. In contrast, practically since its inception, computer graphics—and itsoutgrowth into virtual reality—has presented an interactive environment. It is ourthesis that the augmented reality interface can be made interactive. We presenttechniques that can free the user from restrictive requirements such as working incalibrated environments, results with haptic interface technology incorporated intoaugmented reality domains, and systems considerations that underlie the practicalrealization of these interactive augmented reality techniques.#p#分页标题#e#
Table of Contents
Dedication..................................................................................................... iii
Curriculum Vitae........................................................................................... iv
Acknowledgments.......................................................................................... v
Abstract ....................................................................................................... vii
Table of Contents........................................................................................ viii
List of Tables ................................................................................................ xi
List of Figures.............................................................................................. xii
List of Symbols ........................................................................................... xiv
1 Introduction and Motivation........................................................................ 1
1.1 The Interactive Augmented Reality Interface ........................................ 1
1.2 The Major Challenges for Augmented Reality Systems ......................... 2
2 Augmented Reality: Potential and Challenges .............................................. 5
2.1 How Does Augmented Reality Differ from Virtual Reality? .................. 6
2.2 Milgram Reality-Virtuality Continuum.................................................. 8
2.3 Application Domains for Augmented Reality ........................................ 9
2.3.1 Medical........................................................................................ 10
2.3.2 Entertainment .............................................................................. 11
2.3.3 Military........................................................................................ 13
2.3.4 Engineering Design...................................................................... 15
2.3.5 Robotics and Telerobotics............................................................ 16
2.3.6 Manufacturing, Maintenance and Repair ...................................... 17
2.3.7 Consumer Applications ................................................................ 18
2.4 Performance Goals ............................................................................. 19
3 Augmented Reality: Technology and Practice ............................................ 21
3.1 System Components ........................................................................... 21
3.1.1 Augmented reality display technology.......................................... 21
3.1.2 Haptic Technology....................................................................... 25
3.2 A Taxonomy for Registering the Real and Virtual Images ................... 26
3.3 Position-based Augmented Reality...................................................... 27#p#分页标题#e#
3.4 Computer Vision for Augmented Reality ............................................ 28
3.5 Interactive Augmented Reality............................................................ 30
3.6 Limitations of the Previous Work ....................................................... 31
4 Augmenting Reality using Affine Representations...................................... 33
ix
4.1 Affine Representations for Augmented Reality....................................33
4.1.1 Affine camera approximation........................................................33
4.1.2 Affine object structure..................................................................34
4.1.3 Affine reprojection.......................................................................35
4.1.4 Affine projection matrix ...............................................................37
4.1.5 Virtual object placement...............................................................38
4.1.6 Virtual object rendering................................................................39
4.1.7 Visual interactions between objects ..............................................40
4.1.8 Animation....................................................................................43
4.2 Static Registration ..............................................................................44
4.3 Dynamic Registration and System Latency..........................................45
4.3.1 Contributors to system latency .....................................................46
4.3.2 Overcoming latency .....................................................................47
4.4 Haptic Interface ..................................................................................50
4.4.1 Haptic-graphic interaction............................................................51
4.4.2 Haptic demonstrations..................................................................52
4.4.3 Haptic interactions between real and virtual objects......................53
4.4.4 Foreground detection for improved visual occlusion.....................54
4.5 System Implementation.......................................................................58
4.5.1 Tracking subsystem......................................................................58
4.5.2 Graphics subsystem......................................................................61
4.5.3 Haptic subsystem.........................................................................62
4.5.4 Video subsystem..........................................................................63
4.5.5 Software Architecture ..................................................................65
5 Conclusions...............................................................................................71
5.1 Affine Representations: an Attractive Alternative ................................71#p#分页标题#e#
5.1.1 Tracking as a source of registration errors....................................71
5.1.2 The affine approximation as a source of registration errors ...........72
5.1.3 Consequences of a non-Euclidean reference frame........................73
5.1.4 Feature tracking: the coign of the method.....................................74
5.1.5 Class of applications best suited for affine augmented reality ........75
5.2 An Exercise in Software Engineering ..................................................75
5.2.1 Designing for minimum latency ....................................................76
5.2.2 Incorporating haptic technology...................................................77
5.3 A System that Works Surprisingly Well ..............................................78
5.3.1 Qualitative comments...................................................................79
5.3.2 Quantitative registration error studies...........................................80
5.4 The Elusive Augmented Reality Interface............................................80
6 Summary, Contributions and Future Work.................................................82
6.1 Demonstrated Results .........................................................................82
6.2 Contributions of this Thesis.................................................................83
6.2.1 Affine representations for augmented reality.................................83
6.2.2 Realistic interactions with virtual objects ......................................83
x
6.2.3 Analysis of static and dynamic registration errors ......................... 84
6.2.4 System architecture...................................................................... 84
6.3 Future Work....................................................................................... 84
Bibliography................................................................................................. 86
xi
List of Tables
Table 1 - Taxonomy for approaches to registration in augmented reality...................27
xii
List of Figures
Figure 1 - An augmented reality scene........................................................................ 1
Figure 2 - Augmented reality coordinate systems ....................................................... 2
Figure 3 - Registration in augmented reality. (a) correct registration, (b) incorrect
registration......................................................................................................... 3
Figure 4 - Medical domain example of augmented reality ........................................... 5
Figure 5 - Preview of a new footbridge using an augmented reality display (Fraunhofer
Institute for Computer Graphics 1997) ............................................................... 6
Figure 6 - Milgram's Reality-Virtuality Continuum..................................................... 8#p#分页标题#e#
Figure 7 - Image guided surgical procedure (Ettinger, Grimson et al. 1998) ............. 10
Figure 8 - Ultrasound imaging using augmented reality displays (a (UNC - Chapel Hill
1995); b (UNC - Chapel Hill 1997)) ................................................................. 11
Figure 9 - Virtual set technology. (a) virtual set background, (b) live action, (c)
combined video (Gibbs 1995)........................................................................... 12
Figure 10 - Video Surveillance and Monitoring (VSAM) scenario ............................ 14
Figure 11 - Engineering design using an augmented reality display (Breen 1995)...... 15
Figure 12 - Augmented reality in robotics (Rastogi, Milgram et al. 1995) ................. 16
Figure 13 - Equipment maintenance application for augmented reality (Feiner,
MacIntyre et al. 1995)...................................................................................... 17
Figure 14 - Aircraft manufacturing use of augmented reality ( a) (Neumann and Cho
1997); b) Dr. David Mizell, The Boeing Company) .......................................... 18
Figure 15 - Monitor-based augmented reality display ............................................... 22
Figure 16 - Video see-through augmented reality display.......................................... 22
Figure 17 - Video see-through HMD ....................................................................... 23
Figure 18 - Optical see-through augmented reality display........................................ 24
Figure 19 - PHANToM™ haptic interface ............................................................... 25
Figure 20 - Affine point representation..................................................................... 35
Figure 21 - Digitized alignment pattern .................................................................... 40
Figure 22 - Transforms for rendering a virtual object................................................ 40
Figure 23 - Occlusion in augmented reality scenes.................................................... 41
Figure 24 - Gallery of augmented reality images....................................................... 42
Figure 25 - Virtual object translations ...................................................................... 43
Figure 26 - Positions of the camera in affine space during static registration testing.. 45
Figure 27 - Static registration errors at varying camera positions.............................. 46
xiii
Figure 28 - Dynamic registration error experiment....................................................48
Figure 29 - Sample registration error data ................................................................49
Figure 30 - Effect of forward prediction on Registration Error .................................50
Figure 31 - Haptic interactions with a globe .............................................................52#p#分页标题#e#
Figure 32 - Phantom-graphics coupling ....................................................................53
Figure 33 - Interactions with a virtual cube...............................................................53
Figure 34 - Foreground mask plane ..........................................................................55
Figure 35 - Foreground detection for visual occlusion ..............................................56
Figure 36 - System components of an interactive augmented reality system..............58
Figure 37 - Color tracker block diagram...................................................................59
Figure 38 - Block diagram for system incorporating a head-mounted display............64
Figure 39 - Software architecture diagram................................................................65
Figure 40 - Graphic/haptic process main loop...........................................................67
Figure 41 - Tracker client process main loop ............................................................68
xiv
List of Symbols
O Object-to-world transform
C World-to-camera transform
P Camera-to-image plane transform
[xw yw zw ww ]
T Homogeneous world coordinates of a point in
three-dimensional space
[ ] u v h
T Homogeneous coordinates of the projection in the image
plane of a point in three-dimensional space
Π Affine projection matrix
[ ] x y z w
T Homogeneous affine coordinates of a point in
three-dimensional space
f Focal length of the camera lens viewing the real scene
z avg Average distance from camera for a set of points in
three-dimensional space
p0 , , pn  Collection of points in three-dimensional space
Ii The i-th image in a sequence of images
χ ψ, Vectors representing the direction of the rows and columns
of the image plane in the affine camera
ζ Affine viewing direction
a x , a y , az , a o Affine coordinates for bounding box enclosing a virtual
object
Tgv Graphics-to-video transform
g1 , g 2 ,g 3 Position of alignment marks in graphics image coordinate
system
i1 , i 2 , i 3 Position of detected alignment marks in tracker image
coordinate system
a1 , a 2 , a 3 , a4 Homogeneous affine coordinates for four points used to
align Phantom to the global affine coordinate system
Tap Phantom-to-affine transform
1
1 Introduction and Motivation
1.1 The Interactive Augmented Reality InterfaceSince its inception computer graphics has been interactive in nature. One of
the novel aspects of the seminal computer graphics work in Ivan Sutherland’sSketchpad system (Sutherland 1963) was the ability of a user to interact with the
system. A classic text in computer graphics, Newman and Sproull’s Principles ofInteractive Computer Graphics, (Newman and Sproull 1973) highlights thisinteractive nature directly in the title. The creation of interactive virtual environmentsoriginated in the computer graphics domain. The ultimate interactive environment isthe real world. The goal of augmented reality systems is to combine the interactivereal world with an interactive computer-generated world in such a way that they#p#分页标题#e#
appear as one environment. Figure 1 shows a virtual clock tower placed in a real
three-dimensional scene. As the user moves about the real scene and views it from
different viewpoints, the image of the clock tower is continually updated so that it is
perceived as a real object in the scene. This verisimilitude carries through to human
interactions with the virtual object such as moving or lifting it, and the object’s
interaction with real objects, such as collisions. This thesis is concerned with the
Figure 1 - An augmented reality scene
2
visual and haptic (tactile) augmented reality interface. In particular, it addresses the
issues of: (1) how to generate the augmented image composed from live video and
computer-generated images, and (2) how to use a haptic device, the 3+$17R0™, to
interact with the virtual objects.
1.2 The Major Challenges for Augmented Reality
Systems
The major challenge for augmented reality systems is how to combine the real
world and virtual world into a single augmented environment. To maintain the user’s
illusion that the virtual objects are indeed part of the real world requires a consistent
registration of the virtual world with the real world. The nature of this registration
problem in augmented reality systems is seen in Figure 2 where a virtual wireframe is
augmenting two views of a tabletop scene. The registration requirement for creating a
high-fidelity augmented reality environment can be stated in terms of the relationships
that must be determined. These relationships are the object-to-world, O,world-to-camera, C, and camera-to-image plane, P, transforms (Figure 2). Theobject-to-world transform specifies the position and orientation of a virtual object withrespect to the world coordinate system that defines the real scene. Theworld-to-camera transform defines the pose of the video camera that views the realscene. Finally, the camera-to-image plane transform specifies the projection thecamera performs to create a 2D image of the 3D real scene.
object
vertex
graphics camera
coordinate system
graphics
plane
object-centered
coordinate system
video camera
coordinate system
image
plane
world
coordinate system
world
point
C
O
P
Figure 2 - Augmented reality coordinate systems
3
To create an image of the three-dimensional virtual objects consistent with theuser’s current view of the world and the object’s placement in the real world requires
http://www.ukthesis.org/dissertation_sample/jisuanjiwangluo/the definition of the geometric relationships between the virtual and physical objectsshown in Figure 2. Any errors in the determination of these relationships appear to theuser as inconsistencies in the appearance of the virtual objects in the real scene (Figure3a,b). These errors in registering the two images are classified as either static or#p#分页标题#e#
dynamic. The user perceives static errors as differences in the placement orappearance of the virtual objects when viewed from different viewpoints. The
dynamic errors are caused by the graphical augmentation being out of synchronizationwith the real-world scene. Computational, sensing, or control latencies—resulting insystem time lags—are the usual causes of dynamic errors. Delays can cause theaugmented reality system to miss its real-time deadlines and can encourage solutions,
such as prediction and estimation, whose own errors can contribute to the symptoms.The visual effect of these dynamic errors is a shift in the position of the virtual objects
when there is motion in the system.
The discussion so far has been concerned with the visual augmentation of thereal world scene. To faithfully create the interactions with the virtual objects there is
an additional registration problem between the real world and the system generating
the haptic display. There is a haptic-to-world transform that relates the generation of
haptic senses of touch and feel to the world coordinate system. Visually and haptically
correct merging of virtual objects with the view of the real scene requires computation
of all these relationships. Accurately performing this computation while maintaining
real-time response and a low latency is the major challenge for an augmented reality
system.
(a) (b)
Figure 3 - Registration in augmented reality. (a) correct
registration, (b) incorrect registration
4
This thesis provides a solution for the interactive augmented reality interface.
The main contributions are:
• A new method to maintain the registration between the graphic display,
haptic display and view of the real world. This technique uses affine
representations to define a global coordinate system and unlike most
previous augmented reality systems does not require calibration of the
video camera viewing the scene or sensing of its position in the real scene.
• A method for the user to interact in a natural manner with the virtual
objects seen in the augmented reality display. This interaction includes
haptic sensing of the virtual objects, virtual objects exhibiting dynamic and
gravitational behaviors, and interactions between virtual and real objects.
• An analysis of the static and dynamic registration error using our method of
image registration and the effect of simple predictive filtering on dynamic
errors.
• A system architecture that allows for the real-time operation of this
interactive augmented reality system.
The outline of this thesis is as follows. Chapter 2 develops the idea of the ideal
augmented reality system, motivating it by a large variety of current and
safely-predictable near future applications. The challenges that must be overcome to
reach this ideal are difficult given the hardware and software technology that exist#p#分页标题#e#
today. Chapter 3 first makes explicit the current state of augmented reality hardware
and software technology and follows up with a survey on the technical aspects of
current approaches for solving the problem of augmenting reality. By the end of
Chapter 3 we see that current techniques have not fully achieved the requirements
specified in Chapter 2, and we preview our extensions to previous approaches that
support our contributions. Chapters 4 and 5 present our contributions in detail and
suggest promising future applications and research directions. Chapter 6 provides a
summary of these contributions and future opportunities.
5
2 Augmented Reality: Potential and
Challenges
An augmented reality system is a system that creates a view of a real scene by
incorporating computer-generated virtual objects, including those with full
three-dimensional properties, into the scene. As the user of such a system moves
about the real scene the virtual objects appear as if they actually exist in the scene.
Ideally, the virtual objects should interact with the user and real objects in the scene in
a natural manner. The application domains described in Section 2.3 reveal that
augmented reality can take on a number of different forms. In all the applications that
are discussed later, augmented reality enhances the user’s performance in and
perception of the world.
The ultimate goal is to create a system such that the user can not tell the
difference between the real world and the virtual augmentation of it. To the user of
this ultimate system it would appear that he is working in a single real environment.
Figure 4 shows a view of what the user might see while using an augmented reality
system in the medical domain. It depicts the merging and correct registration of data
from a pre-operative imaging study onto the patient’s head. Providing this view in the
operating theater would enhance the surgeon’s performance and possibly eliminate the
Figure 4 - Medical domain example of augmented reality
6
need for any other calibration fixtures during the procedure. Consider another
application scenario as depicted in Figure 5. The city planners want to visualize what
the landscape will look like when a new footbridge is built. They would go to the
proposed site (Figure 5a) and (donning an augmented reality display device) see the
area with the new bridge merged into their view of the landscape (Figure 5b). If
adjustments were needed they could be performed directly on the visual model of the
new bridge.
2.1 How Does Augmented Reality Differ from Virtual
Reality?
Virtual reality is a technology that encompasses a broad spectrum of ideas. It
defines an umbrella under which many researchers and companies express their work.
The phrase was originated by Jaron Lanier, the founder of VPL Research—one of the#p#分页标题#e#
original companies selling virtual reality systems. The term was defined as “a
computer-generated, interactive, three-dimensional environment in which a person is
immersed.” (Aukstakalnis and Blatner 1992). There are three key points in this
definition. First, this virtual environment is a computer-generated three-dimensional
scene that requires high performance computer graphics to provide an adequate level
of realism. The second point is that the virtual world is interactive. A user requires
real-time response from the system to interact with it in an effective manner. The last
point is that the user is immersed in this virtual environment. One of the identifying
marks of a virtual reality system is the head-mounted display often worn by users.
These displays block out all the external world and present to the wearer a view that is
under the complete control of the computer. The user is completely immersed in an
(a) (b)
Figure 5 - Preview of a new footbridge using an augmented
reality display (Fraunhofer Institute for Computer
Graphics 1997)
7
artificial world and becomes divorced from the real environment. For this immersion
to appear realistic the virtual reality system must accurately sense how the user is
moving and determine what effect that will have on the scene being rendered in the
head mounted display.
In contrast, an augmented reality system generates a composite view for the
user. The user sees an image that is the combination of the real scene being viewed
and a computer-generated virtual scene. The virtual scene augments the real
environment with additional information. There are still the requirements that as the
user moves through the workspace the effect on the computer generated world must
be determined. Once that is done the operation of combining the virtual scene with the
real scene must be performed.
The discussion above highlights the general similarities and differences between
virtual reality and augmented reality systems. A very visible difference between these
two types of systems is the immersiveness of the system. Virtual reality strives for a
totally immersive environment. The visual, and in some systems aural and
proprioceptive, senses are under control of the system. This requires the virtual
reality system to model its artificial world completely. Depending on the desired level
of verisimilitude, this is a very complex simulation problem. In contrast, an augmented
reality system augments the real world scene and attempts to maintain the user’s sense
of being in the real world. The rationale behind this is twofold. First, real
environments contain a wealth of information much of which is impossible to model
and simulate by computer. Secondly, if the end goal is to enhance the performance of
a real-world task, it will be performed most naturally if the user still feels immersed in#p#分页标题#e#
the task environment. To maintain the user’s immersion in the real world an
augmented reality system merges the virtual images with a view of the real scene to
create the augmented display. This merging requires a mechanism to combine the real
and virtual that is not present in other virtual reality work. Developing the technology
for merging the real and virtual image streams either optically or in video is an active
research topic (Roland, Holloway et al. 1994) that is not addressed in this thesis. The
technology is briefly described in Section 3.1.1.
Requiring a means to visually merge the views of the real and virtual worlds is
not the major hurdle brought on by the inclusion of the real world in an augmented
reality system. The nature of the visual interface between computer and user is
different. Both virtual reality and augmented reality systems give the user a sense of
immersion in the virtual environment by ensuring that the user receives a consistent set
of sensory inputs. The primary performance goal for a virtual reality system is to
present visual stimuli that are consistent with the changes in body position sensed by
the user. This requires that motions or changes made by the user will result in the
appropriate changes in the perceived virtual world. Because the user is looking at a
virtual world there is no natural connection between the user’s internal proprioceptive
coordinate system and the virtual world coordinate system. A connection must be
artificially created (Azuma 1993). Any inconsistency the user perceives results from a
misregistration between the coordinate system the user maintains internally to describe
8
body position and the coordinate system that describes the graphics system’s
viewpoint in the virtual scene. Errors are perceived here as conflicts between the
visual system and the kinesthetic or proprioceptive systems. The phenomenon of
visual capture gives the vision system a stronger influence in our perception (Welch
1978). This stronger influence allows a user of a virtual reality system to accept or
adjust to the visual stimulus by overriding the discrepancies occurring with input from
the other sensory systems.
Contrast this to the primary performance goal for an augmented reality system
which is to render views of virtual objects that are consistent with the user’s view of
the real environment containing the objects. In this case, errors of misregistration are
between two visual stimuli which we are trying to fuse to see as one scene. The
observer is more sensitive to these errors (Azuma 1993; Azuma 1995). Any
inconsistency, which manifests itself as a difference between two visual stimuli, i.e. the
virtual and real images, derives from a misregistration between the coordinate system
describing the user’s viewpoint in the real scene and the graphics system’s viewpoint in#p#分页标题#e#
the virtual scene. This imposes a tougher registration requirement on augmented
reality systems compared to virtual reality systems.
2.2 Milgram Reality-Virtuality Continuum
Milgram (Milgram and Kishino 1994; Milgram, Takemura et al. 1994)
describes a taxonomy that identifies how augmented reality and virtual reality are
related. He defines the Reality-Virtuality continuum shown as Figure 6. The real
world and a totally virtual environment are at the two ends of this continuum with the
middle region called Mixed Reality. Augmented reality lies near the real-world end of
the spectrum with the predominate perception being the real-world augmented by
computer generated data. Augmented virtuality is a term created by Milgram to
identify systems that are mostly synthetic with some real world imagery added—such
as texture mapping video onto virtual objects. An example of this technology is live
video texture-mapped onto the graphics image of an avatar—a computer-generated
5HDO
(QYLURQPHQW
9LUWXDO
(QYLURQPHQW
$XJPHQWHG
5HDOLW\ $5
$XJPHQWHG
9LUWXDOLW\ $9
0L[HG 5HDOLW\ 05
Figure 6 - Milgram's Reality-Virtuality Continuum
9
virtual character that is a stand-in for the user’s presence within a virtual environment
(Capin, Noser et al. 1997).
Milgram further defines a taxonomy for the Mixed Reality displays. The three
axes he suggests for categorizing these systems are: Reproduction Fidelity, Extent of
Presence Metaphor and Extent of World Knowledge. Reproduction Fidelity relates to
the quality of the computer generated imagery ranging from simple wireframe
approximations to complete photorealistic renderings. The real-time constraint on
augmented reality systems forces them to be toward the low end on the Reproduction
Fidelity spectrum. The current graphics hardware capabilities can not produce realtime
photorealistic renderings of the virtual scene. Milgram also places augmented
reality systems on the low end of the Extent of Presence Metaphor. This axis
measures the level of immersion of the user within the displayed scene. This
categorization is closely related to the display technology used by the system. There
are several classes of displays used in augmented reality systems that are discussed in
Section 3.1.1. Each of these gives a different sense of immersion in the virtual
environment presented to the user. In an augmented reality system, some display
technologies utilize the user’s direct view of the real world. Immersion in that
environment comes from the user simply having his eyes open. It is contrasted to
systems where the merged view is presented to the user on a separate monitor for
what is sometimes called a “Window on the World” (Feiner, MacIntyre et al. 1993a)
view.#p#分页标题#e#
The third, and final, dimension that Milgram uses to categorize Mixed Reality
displays is Extent of World Knowledge. Augmented reality does not simply mean the
superimposition of a graphic object over a real world scene. This is technically an easy
task. To do a realistic merging of virtual objects into a real scene, knowledge about
the world is needed. One difficulty in augmenting reality, as defined here, is the need
to maintain accurate registration of the virtual objects with the real world image This
requires detailed knowledge of the relationship between the frames of reference for the
real world, the camera viewing it and the user as described in Section 1.2. To properly
compute the visual interactions between real and virtual objects, data about their
locations and orientations in three-dimensional space are needed. Correct dynamic
interactions with virtual objects require knowledge of the dynamic characteristics of
both the real and virtual objects in the augmented environment. In some domains
models for the real and virtual worlds are well known, which makes the task of
augmenting reality easier or might lead the system designer to use a completely virtual
environment.
2.3 Application Domains for Augmented Reality
Only recently have the capabilities of real-time video image processing,
computer graphic systems and new display and haptic technologies converged to make
10
possible the creation of an augmented environment. In this environment, images of
three-dimensional virtual objects are correctly registered with the view of the 3D
environment surrounding the user and the user can interact naturally with the virtual
objects. Researchers working with augmented reality systems have proposed them as
solutions in many domains. The literature discusses application areas ranging from
entertainment to military training. Many of the domains, such as medical (Rosen,
Laub et al. 1996), are also considered domains for virtual reality systems. This section
highlights some of the proposed applications for augmented reality
2.3.1 Medical
Because imaging technology is so pervasive throughout the medical field, it is
not surprising that this domain is viewed as one of the more important for augmented
reality systems. Most of the medical applications deal with image-guided surgery.
Pre-operative imaging studies, such as CT or MRI scans, of the patient provide the
surgeon with the necessary view of the internal anatomy. From these images the
surgery is planned. The surgeon visualizes the path through the anatomy to the
affected area where, for example, a tumor must be removed, by first creating a 3D
model from the multiple views and slices in the preoperative study. Through their
extensive training, surgeons become very adept at mentally creating the
three-dimensional visualization that is needed to render a diagnosis. Some newer#p#分页标题#e#
systems do have the ability to create 3D volume visualizations from the imaging study.
Figure 7 shows how augmented reality can be applied so that the surgical team sees
the CT or MRI data correctly registered on the patient in the operating theater while
the procedure is progressing. Being able to accurately register the images at this point
will enhance the performance of the surgical team and may eliminate the need for the
painful and cumbersome stereotactic frames (Mellor 1995a) currently used for
registration. Descriptions of other work in the area of image-guided surgery using
augmented reality can be found in (Lorensen, Cline et al. 1993; Grimson, Lozano-
Figure 7 - Image guided surgical procedure (Ettinger, Grimson
et al. 1998)
11
Perez et al. 1994; Betting, Feldmar et al. 1995; Grimson, Ettinger et al. 1995; Mellor
1995a; Uenohara and Kanade 1995; Jannin, Bouliou et al. 1997).
Another application for augmented reality in the medical domain is in
ultrasound imaging (State, Chen et al. 1994). Using an optical see-through display
(Section 3.1.1) the physician can view a volumetric rendered image of the fetus
overlaid on the abdomen of the pregnant woman. The image appears as if it were
inside the abdomen and is correctly rendered as the user moves. Figure 8a shows an
image from the system along with a second application in ultrasound imaging seen in
Figure 8b. In this second application, the augmented reality image helps the surgeon
guide a biopsy needle to the site of a suspected tumor during a mock breast biopsy
procedure. The V-shaped object in the left part of the image is used for registering the
ultrasound image with the view of the real scene that the surgeon is seeing.
Finally, a future application is the extension of the virtual reality based
craniofacial surgery visualization and simulation systems (Patel, Vannier et al. 1996;
Taylor, Funda et al. 1996) by adding an augmented reality display. These systems
currently allow the surgeon to experiment, within the safety of a virtual environment,
with different treatment approaches for the reconstructive work to be done. The
model that the surgeon works on is a 3D volume visualization derived from a
pre-operative CT or MR study. Augmented reality would allow the surgeon to see the
final results directly on the patient rather than only with the volume visualization.
2.3.2 Entertainment
A simple form of augmented reality has been in use in the entertainment and
news business for quite some time. When you watch an evening weather report the
weather reporter often stands in front of changing weather maps. In the studio the
(a) (b)
Figure 8 - Ultrasound imaging using augmented reality displays
(a (UNC - Chapel Hill 1995); b (UNC - Chapel Hill
1997))
12
reporter is actually standing in front of a blue or green screen. This real image is#p#分页标题#e#
augmented with computer generated maps using a technique called chroma-keying
(Section 3.1.1). It is also possible to create a virtual studio environment so that the
actors appear to be positioned in a studio with computer generated decorating (Gibbs
1995) an example of which is shown in Figure 9. The work with virtual studios goes
beyond the simple chroma-keying of an actor over a flat two-dimensional background
image. It extends the traditional keying to define the background in three-dimensions
and key the live action as a three-dimensional image also. Balcisoy and Thalmann
(1997) present a virtual studio populated by virtual humans that interact with human
actors. The interactions are very carefully scripted and the human actor does not have
the ability to feel a virtual actor. With tracking of the human, appropriate visual
interactions can be accomplished. This system uses calibrated cameras and careful
measurements of the location of objects in the real studio.
(a) (b)
(c)
Figure 9 - Virtual set technology. (a) virtual set background, (b) live
action, (c) combined video (Gibbs 1995).
13
Movie special effects make use of digital compositing to create illusions (Pyros
and Goren 1995). Strictly speaking, with current technology, this is not considered
augmented reality because it is not generated in real-time. Most special effects are
created off-line, frame by frame with a substantial amount of user interaction and
computer graphics system rendering. But some work is progressing in computer
analysis of the live action images to determine the camera parameters and use this to
drive the generation of the virtual graphics objects to be merged (Zorpette 1994).
Princeton Electronic Billboard has developed an augmented reality system that
allows broadcasters to insert advertisements into specific areas of the broadcast
(National Association of Broadcasters 1994). For example, while broadcasting a
baseball game this system places an advertisement in the image so that it appears on
the outfield wall of the stadium. The electronic billboard requires calibration to the
stadium by taking images from typical camera angles and zoom settings in order to
build a map of the stadium including the locations in the images where advertisements
will be inserted. By using pre-specified reference points in the stadium, the system
automatically determines the camera angle being used and referring to the pre-defined
stadium map inserts the advertisement into the correct place. The approach used for
mapping these planar surfaces is similar to that which is presented in Chapter 4 of this
thesis. A French company, Symah Vision, has also developed a similar application.
Another application in sports broadcasting is Fox network’s FoxTrax system
(Cavallaro 1997) for tracking the path of a hockey puck during a game. The path of#p#分页标题#e#
the puck is overlaid on the image of the hockey rink as a blue streak. The streak
changed color based on the speed of the puck. This system requires a detailed
calibration process for each television camera and the ice ring itself.
Augmented reality can be applied to enhance games that people play. A
system (Jebara, Eyster et al. 1997) developed for pocket billiards players uses a
head-mounted display and wearable computer to analyze the layout of the table and
suggest possible shots for the player to take. The trajectory of the shot is displayed as
augmented graphics over the image of the pool table. Or consider a futuristic game of
paintball where players wear augmented reality headsets. The image that the players
see is not only of the game area and their real opponents but virtual players are also
playing along with them.
2.3.3 Military
The military has been using displays in cockpits that present information to the
pilot on the windshield of the cockpit or the visor of their flight helmet. This is a form
of augmented reality display. SIMNET, a distributed war games simulation system, is
also embracing augmented reality technology. By equipping military personnel with
helmet mounted visor displays or a special purpose rangefinder (Urban 1995) the
activities of other units participating in the exercise are seen. While looking at the
horizon, for example, the display-equipped soldier sees a helicopter rising above the
14
tree line (Metzger 1993). Actually, another participant is flying this helicopter in
simulation. In wartime, the display of the real battlefield scene could be augmented
with annotation information or highlighting to emphasize hidden enemy units.
The University of Rochester is participating in the Video Surveillance and
Monitoring (VSAM) project funded by the Defense Advance Research Projects
Agency (DARPA). Figure 10 shows the scenario for using augmented reality in this
project. Aerial reconnaissance units fly overhead and generate reference marks for
registration. Autonomous ground units with video surveillance equipment monitor
sections of the same area. Aerial views augmented by the information from the
surveillance units are generated for strategic command and control. Another scenario
equips ground level warfighter or urban crime/terrorist fighters with special displays.
Aerial reconnaissance units identify suspect objects and transmit the location of these
objects to the ground units. The suspect objects may be hidden from the view of the
ground forces but will appear in the augmented view on their displays.
Figure 10 - Video Surveillance and Monitoring (VSAM) scenario
15
2.3.4 Engineering Design
Imagine that a group of designers is working on the model of a complex device
for their clients. The designers and clients want to do a joint design review even#p#分页标题#e#
though they are physically separated. If each of them had a conference room that was
equipped with an augmented reality display this could be accomplished. The physical
prototype that the designers have mocked up is imaged and displayed in the client’s
conference room in 3D. The clients walk around the display looking at different
aspects of it. To hold discussions the client points at the prototype to highlight
sections and this is reflected on the real model in the augmented display that the
designers are using (Figure 11). Or perhaps in an earlier stage of the design, before a
prototype is built, the view in each conference room is augmented with a computer
generated image of the current design built from the CAD files describing it. This
allows real time interaction with elements of the design so that either side can make
adjustments and changes that are reflected in the view seen by both groups (Ahlers,
Kramer et al. 1995). A technique for interactively obtaining a model for 3D objects
called 3D stenciling that takes advantage of an augmented reality display is being
investigated in our department by Kyros Kutulakos (Kutulakos and Vallino 1996a).
Figure 11 - Engineering design using an augmented reality display
(Breen 1995)
16
2.3.5 Robotics and Telerobotics
In the domain of robotics and telerobotics an augmented display can assist the
user of the system (Kim, Schenker et al. 1993; Milgram, Zhai et al. 1993). Croby and
Nafis (1994) describe an augmented reality telemanipulation system for nuclear reactor
inspection operations. In a telerobotic system, the operator uses a visual image of the
remote workspace to guide the robot. Annotation of the view would still be useful
just as it is when the scene is in front of the operator. There is an added potential
benefit. Since often the view of the remote scene is monoscopic, augmentation with
wireframe drawings of structures in the view facilitates visualization of the remote 3D
geometry. If the operator is attempting a motion he first practices it on a virtual robot
that he sees as an augmentation to the real scene (Figure 12). The operator can decide
to proceed with the motion after seeing the results. The robot executes the motion
pattern directly which in a telerobotics application eliminates the oscillations often
present due to long communication delays to the remote site.
Figure 12 - Augmented reality in robotics (Rastogi, Milgram et al.
1995)
17
2.3.6 Manufacturing, Maintenance and Repair
When a maintenance technician approaches a new or unfamiliar piece of
equipment instead of opening several repair manuals he simply puts on an augmented
reality display. In this display an augmented reality system shows the image of the
equipment augmented with annotations and information pertinent to the repair. For#p#分页标题#e#
example, the location of fasteners and attachment hardware that must be removed are
highlighted. As part of the next step an inside view of the machine highlights the
boards that need to be replaced (Feiner, MacIntyre et al. 1993b; Uenohara and Kanade
1995). Figure 13 shows an example of this. The military has developed a wireless vest
worn by personnel that is attached to an optical see-through display (Urban 1995).
The wireless connection allows the soldier to access repair manuals and images of the
equipment. Future versions might register those images on the live scene and provide
animation to show the procedures that must be performed.
Aircraft manufacturers are particularly active in incorporating augmented
reality systems into their manufacturing and maintenance activities. Boeing
researchers developed an augmented reality display to replace the large work frames
used for making wiring harnesses for their aircraft (Caudell 1994; Sims 1994). Using
this experimental system (Figure 14b), the technicians are guided by the augmented
display that shows the routing of the cables on a generic frame used for all harnesses.
The augmented display allows a single fixture to be used for making the multiple
harnesses. Research undertaken by the University of Southern California (Neumann
and Cho 1996) in conjunction with McDonnell-Douglas is using an augmented reality
system to guide technicians through maintenance and repair sequences Figure 14a.
Figure 13 - Equipment maintenance application for augmented reality
(Feiner, MacIntyre et al. 1995)
18
2.3.7 Consumer Applications
Virtual reality systems are already used for consumer design. There are
programs available for home computers that assist the homeowner with remodeling
projects, such as building a new deck. These computer graphics programs allow you
to graphically build the new deck attached to the back of a general model of a house.
It is conceivable that a future system would allow you to make a video tape of your
house shot from various viewpoints in your backyard. The video is input to your
computer so that the design program could show the new deck in its finished form
attached to your house. Or use a tape of your current kitchen and the augmented
reality program replaces your current kitchen cabinetry with virtual images of the new
kitchen that you are designing.
Applications in the fashion and beauty industry that would benefit from an
augmented reality system can also be imagined. If the dress store does not have a
particular style dress in your size an appropriate sized dress could be used to augment
the image of you. As you look in the three sided mirror you see an image of the new
dress on your body. You view changes in hem length, shoulder styles or other
particulars of the design before you place the order. When you head into some hightech#p#分页标题#e#
beauty shops today you see what a new hair style will look like on a digitized
image of yourself. But with an advanced augmented reality system you see the new
(a) (b)
Figure 14 - Aircraft manufacturing use of augmented
reality ( a) (Neumann and Cho 1997); b) Dr.
David Mizell, The Boeing Company)
19
styling as you move. If the dynamics of hair are included in the description of the
virtual object you also see the motion of your hair as your head moves.
2.4 Performance Goals
The application domains and projects described so far in this chapter motivate
the desire to develop interactive augmented reality systems. These current and future
applications help to shape the requirements specification for an interactive augmented
reality system. Consider the requirements specified in this section to be the ideal
requirements. It is against these requirements that the reader will compare the
achievements of the previous approaches to augmenting reality (Chapter 3) and the
approach put forward by this thesis (Chapter 4). These comparisons should be
tempered somewhat by the particular application under consideration. Some
applications will not demand an “ultimate” augmented reality system.
An augmented reality system with a high degree of verisimilitude and utility
will possess the following ideal characteristics:
• Constrained cost to allow for broader usage. To allow augmented reality
systems to be deployed in a wide range of applications the cost for the
system should be constrained. This leads to a goal of using inexpensive
consumer grade video cameras, personal computer processing and lower
resolution display technology.
• Perfect static registration of virtual objects in the augmented view. When
a virtual object has been placed at a location in the real scene it should
appear to the user to remain at that same position in 3D space unless an
object has interacted with it. If the system can not meet this goal for all
static viewpoints, it will not be possible to met the following more difficult
dynamic registration requirement.
• Perfect dynamic registration of virtual objects in the augmented view.
Visual updates should be performed at a rate of, at least 15 Hz, and
preferably, 30 Hz. Perhaps more importantly, latencies should be
minimized. If changes in the rendering of the virtual objects lag behind the
user action triggering them the virtual objects will appear to “swim” around
in three-dimensional space.
• Perfect registration of visual and haptic scenes. This can be phrased as
WYSIWYF or “What you see is what you feel.” The visual image of a
virtual object should match with its haptic counterpart. The user should
20
feel the surface of a virtual object at the same time and in the same place#p#分页标题#e#
that the augmented view shows the contact.
• Virtual and real objects are visually indistinguishable. In addition to
photorealistic rendering of the virtual objects—the usual consideration for
computer graphics applications—there are additional requirements specific
to interactive augmented reality applications. Visual occlusions between
virtual and real objects must occur correctly. This is not only for virtual
objects occluding real ones, but also for the more difficult case of real
objects occluding virtual ones. Lighting in the augmented view must be
matched between the real and virtual worlds.
• Virtual objects exhibit standard dynamic behavior. When the user
interacts with a virtual object it should move with the same dynamic
behavior that an equivalent real object would exhibit. This includes
correctly rebounding from collisions between virtual objects or between
virtual and real objects. To accommodate this characteristic, the system’s
internal representation of objects should help to compute the graphics
rendering of virtual objects and the interactions and dynamics of all objects.
• The user has unconstrained motion within the workspace. The system
should allow movement without constraints or limitations. It would be
ideal to have no mechanical limitations, blind spots or motion constraints.
• Minimal apriori calibration or run-time setup is required. To determine
the location of the viewer many augmented reality systems require
calibration of the video camera viewing the scene. This calibration process
is tedious to perform and will often limit operation to a single focal length.
Lenses on standard consumer grade video cameras can not be zoomed in or
out because they do not provide feedback of zoom position. During
start-up of the system the user should not have to perform extensive setup
such as measurement of the locations of fiducials, or complicated
procedures for placing objects into the scene.
To date, no augmented reality system, including the one developed as part of
this thesis work, has met all of the performance goals for the ideal system. Comparing
these goals against the capabilities of the previous approaches to augmenting reality
described in Chapter 3 and the approach using affine representations presented by this
thesis (Chapter 4) the reader can determine how close the state-of-the-art comes to
achieving all of the performance goals for the ultimate interactive augmented reality
system.
21
3 Augmented Reality: Technology and
Practice
This chapter describes the technology and practice of augmented reality
systems. There is some unique technology involved upon which augmented reality
systems are built. The first section of this chapter discusses the display and haptic
technology that is available for use in an interactive augmented reality system. The#p#分页标题#e#
chapter continues with a discussion of the previous practice for realizing an augmented
reality interface by, first, presenting a simple taxonomy for the methods used to
register the real and virtual images. A review of the prior research in registering the
virtual and real images follows. The chapter concludes with a discussion of the small
amount of haptic work associated with augmented reality interfaces.
3.1 System Components
A system that creates an augmented reality interface is a tightly connected set
of components operating in real time. This section describes the components of
augmented reality systems and highlights the state-of-the-art technology that is
available for their implementation specifically in the areas of display and haptic
technology.
3.1.1 Augmented reality display technology
Combining real and virtual images into a single image presents new technical
challenges for designers of augmented reality systems. How to do this merging of the
two images is a basic decision the designer must make. Section 2.2 discussed the
continuum that Milgram (Milgram and Kishino 1994; Milgram, Takemura et al. 1994)
uses to categorize augmented reality systems. His Extent of Presence Metaphor
directly relates to the display that is used. At one end of the spectrum is
monitor-based viewing of the augmented scene. This has sometimes been referred to
as “Window on the World” (Feiner, MacIntyre et al. 1993a) or Fish Tank virtual
reality (Ware, Arthur et al. 1993). The user has little feeling of being immersed in the
22
environment created by the display. This technology, diagrammed in Figure 15, is the
simplest available. It is the primary technology that the work in this thesis uses as do
several other systems in the literature (Drascic, Grodski et al. 1993; Ahlers, Breen et
al. 1994).
To increase the sense of presence other display technologies are needed.
Head-mounted displays (HMD) are widely used in virtual reality systems. Augmented
reality researchers work with two types of HMD. These two types are called video
see-through and optical see-through. The “see-through” designation comes from the
need for the user to be able to see the real world view that is immediately in front of
him even when wearing the HMD. The standard HMD used in virtual reality work
$XJPHQWHG
9LHZ
&DPHUD
3RVLWLRQ 9LGHR RI
5HDO 6FHQH
9LGHR
0HUJLQJ
*UDSKLFV
6\VWHP 9LUWXDO
2EMHFWV
$XJPHQWHG
9LGHR
RSWLRQDO LQ
VWHUHR
5HDO
:RUOG
Figure 15 - Monitor-based augmented reality display
+HDG
3RVLWLRQ
9LGHR RI
5HDO 6FHQH
9LGHR
0HUJLQJ
*UDSKLFV
6\VWHP 9LUWXDO
2EMHFWV
5HDO
:RUOG
0RQLWRUV
9LGHR
&DPHUD#p#分页标题#e#
+HDGPRXQWHG
'LVSOD\
8VHU
V
9LHZ
Figure 16 - Video see-through augmented reality display
23
gives the user complete visual isolation from the surrounding environment. Since the
display is visually isolating the system must use video cameras that are aligned with the
display to obtain the view of the real world. A diagram of a video see-through system
is shown in Figure 16. Video see-through is really the same architecture as the
monitor-based display except that now the user has a heightened sense of immersion in
the display. Some experiments with a video see-through system have been done as
part of our work (Section 4.5.4). Figure 17 shows the configuration of two video
cameras mounted on an HMD.
Both the monitor-based and video see-through display technologies require a
method to merge two video channels—real and virtual—into a single image. This is
an operation quite similar to the process of putting a weather forecaster in front of
computer-generated weather maps for the nightly TV news. The operation is known
as video keying and is based on either luminance or chrominance information in the
video signals. One video channel is called the key while the second is the background.
The key controls which video signal appears at the output of the keyer on a
pixel-by-pixel basis. At every pixel where the key meets the keying criterion the
background video signal is displayed or “keyed”. At all other pixel locations the key is
displayed. With luminance keying the criterion is that the luminance component is
below a threshold luminance value. Usually this is set close to the luminance of the
darkest region in the key. In those dark regions the background video channel is
displayed. Other regions in the key signal—representing objects in the foreground
image like the weather forecaster—are most likely above the luminance key value and
will appear to be in front of the background. The other style of keying, which uses
color as the key criterion, is known as chroma-keying. The operation is identical to
luminance keying except the criterion is set to be a match to a certain color, often blue
(Figure 9).
Figure 17 - Video see-through HMD
24
The optical see-through HMD (Manhart, Malcolm et al. 1993) eliminates the
video channel that is looking at the real scene. Instead, as shown in Figure 18, the
merging of real world and virtual augmentation is done optically in front of the user.
This technology is similar to heads up displays (HUD) that commonly appear in
military airplane cockpits and recently some experimental automobiles. In this case,
the optical merging of the two images is done on the head mounted display, rather
than the cockpit window or auto windshield, prompting the nickname of “HUD on a#p#分页标题#e#
head”.
There are advantages and disadvantages to each of these types of displays.
They are discussed in greater detail by Azuma (Azuma 1995). There are some
performance issues, however, that will be highlighted here. With both of the displays
that use a video camera to view the real world there is a forced delay of at least one
frame time to perform the video merging operation. At standard frame rates that will
be potentially a 33.33 millisecond delay in the view the user sees. Since the computer
controls everything the user sees, compensation for this delay could be made by
correctly timing the other paths in the system. Or, alternatively, if other paths are
slower then the video of the real scene could be delayed. With an optical see-through
display the view of the real world is instantaneous so it is not possible to compensate
for system delays in other areas. On the other hand, with monitor-based and video
see-through displays a video camera is viewing the real scene. Access to the image
generated by the camera can be put to advantage if the system analyzes the video data
to extract tracking information. The technique for augmenting reality described in
Chapter 4 exploits this advantage. The optical see-through display does not have this
additional information. The only position information available with that display is
what can be provided by position sensors on the head mounted display itself.
+HDGPRXQWHG
'LVSOD\
5HDO
:RUOG
2SWLFDO
0HUJLQJ
*UDSKLFV 0RQLWRUV
6\VWHP 9LUWXDO
2EMHFWV
+HDG
3RVLWLRQ
8VHU
V
9LHZ
Figure 18 - Optical see-through augmented reality display
25
3.1.2 Haptic Technology
Haptic technology provides the user with an ability to experience touch
sensations. In the context of interactive augmented reality this is not referring to the
apparatus used in flight and driving simulators. The user’s kinesthetic and
proprioceptive receptors are being stimulated by those systems. In an interactive
augmented system the emphasis is on user interaction with the augmented
environment. This requires force reflexive components that give the user a sense of
feeling the virtual objects, touching their surface, and interacting with them in a
dynamic fashion. Some work in virtual reality applications uses a haptic interface. In
Project GROPE at the University of North Carolina (Brooks, Ouh-Young et al. 1990)
the user manipulates molecules in a virtual environment using a large scale
manipulator. The Rutgers Dexterous Master (Fabiani, Burdea et al. 1996) is a
pneumatic cylinder system that applies force feedback to several fingers and allows the
user to feel the general shape and stiffness of an object. Other force reflexive
exoskeletons that apply forces to the arms and legs of the user are also commercially#p#分页标题#e#
available. The current state of the art in haptic interfaces is reviewed in Srinivasan and
Basdogan (Srinivasan and Basdogan 1997) and Ziegler (Ziegler 1996).
None of these haptic components is quite satisfactory for the interactions
wanted in our augmented reality system. To allow realistic interactions with the
virtual objects we wanted the user to feel the weight of the objects. This eliminated
bladder gloves and the Rutgers Dexterous Master that can not simulate gravitational
forces. Exoskeletons and large scale manipulators were too large for the work area
envisioned. We chose the 3+$17R0™, manufactured by Sensable Technologies. This
Figure 19 - 3+$17R0™ haptic interface
26
device, shown in Figure 19, looks like a miniature robot arm. In many ways it is.
Each joint is driven by a small motor and the controller coordinates the motor
operation to generate force feedback at the end effector. The standard end effector is
a thimble into which the user inserts a finger. With the supplied GHOST library the
system can define a world of objects that create the haptic scene to be rendered. The
Phantom gives the user a very compelling sense of touching these virtual objects.
Mass can be assigned to the objects so if the user places his finger under an object and
lifts, the weight of the object is felt resting on the finger. It is also possible to simulate
characteristics such as object surface compliance and texture.
Haptic simulation comes with a high computational load requirement (Mark,
Randolph et al. 1996). To provide a veridical sensation, the Phantom low-level
processing servo loop requires servicing at a 1 kHz rate. This places a high
computational load on the processor supporting this haptic device. We use the
smallest device available. It has 3 degree of freedom force feedback and supports the
range of motion approximate to hand movement pivoting at the user’s wrist. Sensable
Technologies also manufactures larger sized devices and the uninstrumented standard
end tool can be replaced with an instrumented stylus tool. This last item provides data
about the orientation of the user’s grasp at the active end of the Phantom.
3.2 A Taxonomy for Registering the Real and Virtual
Images
The primary challenge for an augmented reality system is to determine the
relationship between the multiple coordinate systems shown in Figure 2. Only when
these relationships are known can the images of the virtual objects and the view of the
real scene be correctly registered for merging as a single image. Most of the previous
work has approached this problem in a straightforward manner using position sensing
to obtain the location and orientation of the viewer or the camera viewing the scene.
This combined with information about the calibration parameters of the camera#p#分页标题#e#
completely defines the relationships between coordinate systems.
We classify previous approaches in a taxonomy according to their usage of
position sensing and camera or scene calibration. Table 1 shows this taxonomy.
Methods using position sensing typically measure the location of the viewer and/or
camera viewing the scene with a sensor. The Polhemus magnetic sensor (Polhemus
Corporation 1996) is typical. The other axis in Table 1 classifies methods based on
whether they require the intrinsic parameters of the camera viewing the scene or
knowledge of the metric location of features in the real scene. The intrinsic camera
parameters might include lens focal length, and the height and width of the pixel
sensor. The scene calibration is usually the location of fiducial points in the three
dimensional real scene. The system detects the fiducials in the image at runtime and
from their position computes the location of the viewer.
27
3.3 Position-based Augmented Reality
Correct registration of a virtual image with the image of the real scene requires
the system to represent the two images in the same frame of reference. This requires
determining the transforms between the various coordinate frames in the system as
discussed in Section 1.2. Many augmented reality systems approach the problem of
computing the transforms shown in Figure 2 in a straightforward manner using
sensing, calibration and measurement to explicitly determine each transform (Feiner,
MacIntyre et al. 1993b; Janin, Mizell et al. 1993; Rastogi, Milgram et al. 1995;
Tuceryan, Greer et al. 1995). These systems use sensors—based on mechanical,
magnetic or optical techniques—to measure the position and angular orientation of the
camera with respect to the world coordinate system. These two measurements
together are termed the pose of the camera and determine the world-to-camera
transform, C. Quantifying the camera-to-image transform, P, requires knowledge of
the intrinsic parameters, such as focal length and aspect ratio, of the camera. These
can be determined by performing a calibration procedure on the camera (Tsai 1987).
The third transform, O, is computed by simple measurement. The world coordinate
system is a standard three-dimensional Euclidean space. The user measures the
desired position and orientation for a virtual object in the real scene. Using the
methods just described, all of the necessary transforms are known so that, at least in
principle, virtual objects can be rendered and merged correctly with the live video.
These position-based approaches do suffer from limitations. Position tracking
and camera calibration techniques are error prone in operation resulting in
misregistration of the real and virtual images. So far none of the pose sensors have
been completely satisfactory for an augmented reality application (Azuma 1997).#p#分页标题#e#
Mechanical sensors place limits on the range of the work space and require attachment
to a restrictive linkage. Magnetic sensors are susceptible to disturbances in their
Table 1 - Taxonomy for approaches to registration in augmented reality
Position Sensing
Camera and/or
Scene Calibration
Yes No
Yes Janin, et al (1993)
Feiner, et al (1993b)
Rastogi, et al (1995)
Tuceryan, et al (1995)
State, et al (1996)
Grimson, et al (1995)
Mellor (1995a)
Hoff, et al (1996)
Neumann and Cho (1996)
No State, et al (1994) Uenohara and Kanade (1995)
Kutulakos and Vallino (1996a)
28
generated magnetic field created by metal objects in the workspace. Calibration for
these distortions can reduce the errors (Byrson 1992). The magnetic sensors also have
latencies that can only be improved with predictive estimation of pose (Azuma and
Bishop 1994) Techniques for calibrating a camera to determine its intrinsic parameters
are available (Tsai 1987) but it is a tedious process to perform. The intrinsic
parameters of a camera may change over time, requiring recalibration. In particular,
zoom lenses, like those found on common consumer-grade video cameras, may change
focal length either by being intentionally zoomed or because of wear through use.
Accurate sensing of zoom setting is not available, so recalibration is required after
each change in focal length. If cost containment is not a concern then instrumented
zoom lenses can be used, but they require precalibration of the lens at each zoom
setting (and possibly occasional recalibration). Any errors introduced by incorrect
pose sensing or camera calibration propagate through the system and appear as
misregistration in the final augmented reality image.
One position-based reference in Table 1 does not require camera or scene
calibration. State, Chen, et. al. (1994) describe the ultrasound visualization system
whose operation is shown in Figure 8a. Their system uses Polhemus sensors for
measuring the position of the ultrasound imaging wand and the user’s position and
orientation while wearing an optical see-through display system. These measurements
are both in the same coordinate system and thus directly provide the relationship
between them. There is no camera, per se, in the system so calibration is not needed.
Durlach and Mavor (1995) come to the conclusion that position tracking as
used in augmented reality systems will never work well enough to be the sole tracking
technology because of the inaccuracies and delays in the system. They suggest that
the most promising technique may combine standard position tracking for gross
registration and an image based method for the final fine tuning. State, Hirota, et. al.
(1996) have implemented such a tracking methodology and their work will be#p#分页标题#e#
discussed in the next section with other registration methods that apply computer
vision techniques to the problem.
3.4 Computer Vision for Augmented Reality
The initial approaches to augmented reality discussed in the previous section all
overlook one source of significant information. Computer vision research has
developed techniques for extracting information about the structure of a scene, the
intrinsic parameters of the camera, and its pose from images of the scene. Recent
augmented reality systems are applying computer vision methods to improve
performance. Tuceryan et al. (1995) provides a careful analysis of procedures that
rely on computer vision for calibrating a monitor-based augmented reality system.
There is a growing number of systems described in the literature that try to mitigate or
eliminate the errors due to tracking and calibration by using image processing of the
29
live video data (Bajura and Neumann 1995; Wloka and Anderson 1995). Other
systems (Hoff, Nguyen et al. 1996; Neumann and Cho 1996; Koller, Klinker et al.
1997) use knowledge of the intrinsic camera parameters and tracking of fiducials
placed in known locations in the scene to invert the camera projection operation and
obtain an estimate of the viewer pose.
A hybrid method—using fiducial tracking in combination with standard
magnetic position tracking (State, Hirota et al. 1996)—requires an initialization
procedure that determines the intrinsic parameters of the cameras viewing the scene.
This system tracks fiducials in two video images. The locations in the scene of the
fiducials are known. The position of the viewer is computed by inverting the
projection operation. Position data obtained from a magnetic tracker aides in
localization of the landmarks. This aide is particularly useful when large motions are
encountered between two video frames. Algorithms that rely solely on vision-based
tracking often can not determine the interframe correspondences between fiducials
when large motions occur between frames. The magnetic tracker position estimates
are also used when occlusions prevent the vision system from seeing the required
minimum number of fiducials.
A few recent augmented reality systems neither rely on a method for tracking
the position of the camera nor require information about the calibration parameters of
that camera. These systems solve the problem of registering the virtual objects over
the live video as a pose estimation problem. By tracking feature points in the video
image these systems invert the projection operation performed by the camera and
estimate the camera’s parameters. This does, however, require knowledge of the
Euclidean 3D location of the feature points so that the camera parameters can be
estimated in a Euclidean frame. For each viewpoint, two of the systems (Grimson,#p#分页标题#e#
Lozano-Perez et al. 1994; Grimson, Ettinger et al. 1995; Mellor 1995b; Mellor 1995a)
use a linear method to solve for the camera’s projection transformation from the
positions of tracked fiducials. The pose—which specifies the 3D position and
orientation of the camera—is not directly determined. Instead these systems use the
computed projection transformation to render the virtual objects. The camera must be
calibrated at initialization time and a laser range finder provides the 3D positions of the
fiducials in the scene.
One common theme of this previous work is that all the reference frames are
defined in a 3D Euclidean space. To extract this information from the image of the
real scene is an error prone process. By relaxing the requirement that all frames have a
Euclidean definition it is possible to eliminate the need for this precise calibration and
tracking. An approach similar to the one proposed by this thesis is described by
Uenohara and Kanade (1995). They visually track features in live video images and
represent the points on planar overlays as the linear combination of tracked feature
points. Their work did not consider, however, the placement and rendering of
three-dimensional virtual objects were not considered however. Chapter 4 describes
our method for augmenting reality that requires no a priori metric information about
the intrinsic and extrinsic parameters of the camera, where the user is located in the
30
world, or the position of objects in the world. Our method achieves the capacity to
operate with no calibration information by using an affine representation as a common
coordinate system, and substituting a simple correspondence problem for the metric
calibration problem.
3.5 Interactive Augmented Reality
None of the prior work discussed to this point has included any interaction
with the virtual objects except for the visual changes seen in the augmented reality
display whenever the user changed viewpoint. One performance goal for an
augmented reality system is that the user can naturally interact with the virtual objects.
This interaction should include not only moving the objects, but also feeling their
surfaces and the forces applied to them by gravity and by other objects in the
environment. Haptic relates to the sense of touch. The user of a haptic interface
receives tactile feedback that adds the ability to feel objects. There is no work in the
literature that describes haptic extensions in augmented reality systems. All the
previous haptic research is in the areas of telemanipulation and virtual reality. We can
apply the work in these two areas for haptic interaction with the virtual objects but it
does not provide insights into the problems of registration with the real scene or
interactions between real and virtual objects. One of the reasons stated by Mine,#p#分页标题#e#
Brooks, et. al. (1997) for the paucity of virtual-environment applications that have left
the laboratory setting is the lack of haptic feedback.
Brooks, Ouh-Young, et. al. (1990) describes one of the first examples of a
haptic interface used in virtual reality. This system uses a large sized telemanipulation
arm that is driven by motors to give force feedback to the user. Molecular docking is
the application area addressed by the project. The user operates in an immersive
environment experimenting with finding positions for bonding two molecules together.
The forces of repulsion and attraction for a bonding operation are correctly simulated
and applied to the manipulator. The molecular experts using this system find that this
addition of haptic sensation greatly improves their ability to discover novel compound
arrangements. Two reported medical applications of haptic interfaces in virtual
environments are for medical training. Ziegler, Brandt, et. al. (1997) describe a
simulator for arthroscopic surgery that uses force feedback in the virtual environment
to train surgeons in the procedure. Using the Rutgers Master II force feedback device
Dinsmore, Langrana, et. al. (1997) built a virtual environment for training physicians
to locate and palpate tumor masses.
The haptic device that is most suited for our augmented reality applications is
the Phantom. Its applicability is due not only to its small size but also for the range of
haptic feedback that is available. This tabletop device provides force feedback to the
user’s fingertip. Because of its size it is well suited for workspaces that fall into the
31
category of virtual-environment interaction that is “working within arm’s reach”
(Mine, Brooks et al. 1997).
The demonstrations of the work of State, Hirota et. al. (1996) show interaction
with virtual objects. Correct visual interactions occur when virtual objects move
behind a real object. Using the metaphor of a magnetic finger, the user is also able to
attach a virtual object to his fingertip and move it within the workspace. This is all
done within a framework of hybrid position tracking that requires knowledge of the
3D location of fiducial points in the scene. There is neither haptic feedback nor
dynamic interactions between the virtual and real objects. Using the registration
technique of Uenohara and Kanade (1995), Yokokohji, Hollis et. al. (1996)
demonstrate a haptic interface for an augmented reality system. They use a Puma 560
robot for the force feedback and track a small plane attached to the end effector of the
robot. The entire real scene is draped in blue cloth to allow for easy chroma-keying of
the video image of the user’s arm and hand. The augmented display merges a virtual
cube located where the small plane was detected and live video of the user’s arm and#p#分页标题#e#
hand. There is neither motion of the virtual object nor interactions between virtual and
real objects in their system.
3.6 Limitations of the Previous Work
So far we have seen that most of the techniques used for creating and
maintaining a correctly registered augmented view of the real world require some
apriori information about the system. This information takes several forms and any
particular approach requires one or more of the following pieces of information:
• sensing the position of the video camera viewing the scene,
• metric information about the intrinsic parameters of the camera, or
• the location of fiducial markers in the scene.
The most commonly used magnetic position sensing is susceptible to magnetic field
disturbances generated by objects in the workspace and has response times that create
unacceptable latencies in system operation (Byrson 1992; Azuma and Bishop 1995).
Requiring metric calibration information about the camera adds the calibration step but
also limits the flexibility of inexpensive video cameras that have zoom lenses since a
change in focal length requires recalibration. In some application environments it may
not be possible to know measured locations of fiducial markers and so any approach
that relies on that could not be used. Military battlefield applications or, generally,
unfamiliar outdoor environments come to mind when considering this limitation. And
finally, a scant amount of work is reported in the literature for bringing the haptic
technology used in virtual reality applications into augmented reality domains.
32
With those limitations in mind, in the next chapter we present our method of
augmenting reality with affine representations. It has the advantage that it requires
neither position sensing nor camera calibration to generate properly registered
augmented reality images and, unlike the work of Uenohara and Kanade (1995), it
merges full three-dimensional virtual models into the image of the real scene. In
addition, we show how we incorporate haptic technology into the system allowing the
user to naturally interact with virtual objects that exhibit dynamic behaviors.
33
4 Augmenting Reality using Affine
Representations
4.1 Affine Representations for Augmented Reality
The approach to augmenting reality that we describe in the following sections
is motivated by recent computer vision research that has determined structure for
objects in a scene and the pose of the camera viewing it without knowledge of the
object-to-world, world-to-camera and camera-to-image plane transforms. Koenderink
and van Doorn (1991) and Ullman and Basri (1991) provide the following observation:
Given a set of four or more non-coplanar 3D points, the
projection of all points in the set can be computed as a linear#p#分页标题#e#
combination of the projection of just four of the points.
We use this observation to create a global coordinate system in which we
express the coordinate systems diagrammed in Figure 2. Additionally, we define this
global coordinate system solely from the locations of visible features in the real scene
with no knowledge of the intrinsic parameters and pose of the camera.
4.1.1 Affine camera approximation
Accurate determination of where a point on a virtual object will project in the
video image is essential for correct registration of the virtual and live-video (Foley, van
Dam et al. 1990; Tuceryan, Greer et al. 1995). In homogeneous coordinates, the
projection, [u v h]
T , in the video image of a 3D world point [xw yw zw ww ]
T
can be
expressed using the equation:
34
u
v
h
x
y
z
w
w
w
w
w






=






P × C × O × 3 4 4 4 4 4 . (1)
The transforms P3×4 , C4×4 , and O4×4 are shown in Figure 2 and are the
camera-to-image plane, world-to-camera and object-to-world transforms respectively.
Equation 1 assumes that object, world and camera coordinate systems are
independently defined. Previous approaches to augmented reality have been based on
an explicit determination of each of the transforms that relate the coordinate systems.
Our approach represents the three coordinate systems in a single non-Euclidean
coordinate system and expresses the projection operation with the equation:
u
v
h
x
y
z
w






=






Π × 3 4 , (2)
where [x y z w]
T
are the new coordinates for the point transformed from
[xw yw zw ww ]
T .
To fully exploit this simplification and the observation of Koenderink and van
Doorn (1991) and Ullman and Basri (1991) we use weak perspective projection to
model the camera-to-image plane transformation P (Shapiro, Zisserman et al. 1995)
Under a weak perspective approximation, the projections in the image plane of 3D
points are determined by first projecting the points along parallel rays orthogonal to
the image plane. The entire image is then scaled by f / zavg where f is the camera’s
focal length and zavg is the average distance of the points from the image plane. This
approximation is commonly seen in the computer vision literature and holds when the
front to back depth of objects along the viewing direction is small compared to the
viewing distance and the object’s distance from the camera is large compared to the#p#分页标题#e#
camera lens’s focal length (Thompson and Mundy 1987).
4.1.2 Affine object structure
All points in this system are represented with an affine representation whose
coordinate system is defined using the location of feature points in the image. This
representation is invariant when an affine transformation, i.e. translation, rotation,
non-uniform scaling, is applied to all points. Transforms caused by the motion of a
35
weak perspective camera viewing a scene will maintain this affine invariant
representation. Affine reprojection or transfer (Barrett, Brill et al. 1992; Shashua
1993) is used to compute the projection of virtual objects placed into the real scene.
The affine representation for a collection of points, p0 , , pn ,  is composed of:
the affine basis points which are four non-coplanar points, one of which is specially
designated as the origin; and the affine coordinates of each point that represent the
point with respect to the affine basis points. The properties of affine point
representation are illustrated in Figure 20.
4.1.3 Affine reprojection
Property 1 (Affine Reprojection Property) The projection, [up v p ]
T
, of any
point, p, represented with affine coordinates [x y z]
T , is expressed by the equation:
u
v
u u u u u u
v v v v v v
x
y
z
u
v
p
p
p p p p p p
p p p p p p
p
p

 

 
=
− − −
− − −

    






+

 

 
×
1 0 2 0 3 0
1 0 2 0 3 0
2 3
0
0
Π


(3)
where [upi vpi ] i
T
, = 0, ,3  are the projections of the origin p0 , and the
three other basis points, p1 , p2 , and p3 ,that define the affine coordinate system. This
can be equivalently expressed in homogeneous coordinates with the equation:
p1
p2
p3
*p 2 =
−
−

 

 
u u
v v
2 0
2 0
*p3 =
−
−

 

 
u u
v v
3 0
3 0
*p1 =
−
−

 

 
u u
v v
1 0
1 0 p [p p p p ] x 2
x
y
z
=






& & &
1 3 0
1
p0
p0
0
0
=

 

 
u
v
Figure 20 - Affine point representation#p#分页标题#e#
36
u
v
u u u u u u u
v v v v v v v
x
y
z
p
p
p p p p p p p
p p p p p p p
1 0 0 0 1
1
1 0 2 0 3 0 0
1 0 2 0 3 0 0
3 4






=
− − −
− − −












Π ×


. (4)
Equation 4 provides an explicit definition for the projection matrix Π3×4 seen
in Equation 1 and defines the projection of a 3D point in any new image as a linear
combination of the projections of the affine basis points in that image. Calculation of
the projection of a point on a virtual object has been reduced to knowing the location
of the projections of the affine basis points in a new image and the homogeneous affine
coordinates for the virtual point. The affine basis points will be defined by visually
tracking features in the scene and determining the projections in each new video
image. The following property provides the technique for determining the affine
coordinates of any 3D point.
Property 2 (Affine Reconstruction Property) The affine coordinates of any point
can be computed from Equation 4 if its projection in at least two views is known and
the projections of the affine basis points are also known in those views.
This results in an over-determined system of equations based on Equation 4.
Given two views, I1, I2 , of a scene in which the projections of the affine basis points,
p0, , p3  , are known then the affine coordinates [x y z ]
T 1 for any point p can be
recovered from the solution of the following equation:
u
v
u
v
u u u u u u u
v v v v v v v
u u u u u u u
v v v v v v v
p
p
p
p
p p p p p p p
p p p p p p p
p p p p p p p
p p p p p p p
1
1
2
2
1
1
0
1
2
1
0
1
3
1
0
1
0
1
1
1
0
1
2
1
0
1
3
1
0
1
0
1
1
2
0
2
2
2
0
2
3
2
0
2
0
2
1
2
0
2
2
2
0
2
3
2
0
2
0
2






=
− − −
− − −
− − −
− − −





#p#分页标题#e#






x
y
z
1
(5)
where [up v ]
i
p
i T
and [u v ] p j
i
p j
i
T
are the projections of point p and affine
basis point pj, respectively, in image Ii.
37
4.1.4 Affine projection matrix
One performance goal for an augmented reality system is the ability to operate
in real-time which will often limit the photorealism possible in rendering the virtual
objects. As a minimum the very basic operation of hidden surface removal (Foley, van
Dam et al. 1990) must be performed to have a correct visualization of any
three-dimensional virtual object. Hidden surface removal uses a front-to-back
ordering of surfaces to determine visibility. The front-to-back ordering is obtained by
assigning a depth to each rendered point that represents its distance from the
viewpoint. The following two properties extend the familiar notions of “image plane”
and “viewing direction” to the affine representation. This extension allows for the
required front-to-back ordering of virtual surfaces and use of hardware-supported
rendering via z-buffering. The image plane and viewing direction define a 3D
coordinate system that describes the orientation of the camera. The graphics system
can operate entirely within this global affine coordinate system and completely ignore
the original object representation.
Property 3 (Affine Image Plane) Let χ and ψ be the homogeneous vectors
corresponding to the first and second row of Π2×3 , respectively. (1) The vectors χ
and ψ are the directions of the rows and columns of the camera, respectively,
expressed in the coordinate frame of the affine basis points. (2) The affine image
plane of the camera is the plane spanned by the vectors χ and ψ .
The unique direction in space along which all points project to a single pixel in
the image defines the viewing direction of a camera under our model of weak
perspective projection. In the affine case, this direction is expressed mathematically as
the null-space of the matrix Π2×3 :
Property 4 (Affine Viewing Direction) When expressed in the coordinate frame of
the affine basis points, the viewing direction, ζ , of the camera is given by the cross
product
ζ = χ ×ψ . (6)
Property 4 guarantees that the set of points {p + tζ , t ∈ℜ} that defines the line
of sight of a point p will project to the same pixel under Equation 3. The z-buffer
value needed for hidden surface removal that is assigned to every point is the dot
product [ζ T 0]⋅ pT . The actual magnitude of this value is irrelevant: the important
characteristic is that the front-to-back order of virtual points rendered to the same#p#分页标题#e#
pixel is correctly maintained along the camera viewing direction.
38
The affine image plane and viewing direction vectors define a 3D coordinate
system that in general will not be an orthonormal reference frame in Euclidean 3D
space. Despite this, correct visible surface rendering of any point
[x y z ]
T 1 defined in the global affine coordinate system can be performed by
applying the transformation:
u
v
w
u u u u u u u
v v v v v v v
x
y
z
p p p p p p p
p p p p p p p
T
1
0
1 1
1 0 2 0 3 0 0
1 0 2 0 3 0 0
4 4






=
− − −
− − −












×
ζ
0
Π


, (7)
where u and v are the graphic image coordinates of the point andw is its assigned
z-buffer value.
Π4×4 has the same form as the viewing matrix that is commonly used in
computer graphics systems to perform transforms of graphic objects. The structural
similarity allows standard graphics hardware to be used for real-time rendering of
objects defined in the affine coordinate system developed here. In our system, a
Silicon Graphics Infinite Reality Engine is directly used to render virtual objects with
hardware-supported hidden surface removal.
4.1.5 Virtual object placement
In order to use the affine projection matrix Π4×4 to render the virtual objects,
those objects must be represented in the global affine coordinate system defined by the
tracked basis points. The 3D object-centered Euclidean coordinate system that
commonly describes a virtual object must be transformed to the common affine
coordinate system developed in the previous sections. The calculation of this
object-to-affine transform is done at runtime. In the simplest approach, the user
interactively specifies this transform by placing a real object in the scene that defines a
bounding box for the virtual object. The bounding box is defined by specifying the
location of the x, y, z axes and the origin of the bounding box. In two separate views
of the scene the user specifies these four locations. From these four point
correspondences and the affine projection matrices, Π4×4 , computed in the two
images, the affine coordinates for the points, a a a a x , y , z , o , are computed using the
affine reconstruction property (Section 4.1.3). Assuming that the virtual object’s
coordinate system has been scaled to a bounding box of unit size, the object-to-world
transform, O4×4 , from Figure 2 can be calculated from the solution of#p#分页标题#e#
39
[ ] a a a a O x y z o =






4×4
1 0 0 0
0 1 0 0
0 0 1 0
1 1 1 1
(8)
In this case, the world coordinate system is the common affine coordinate system. The
computed transform handles both the change to the common affine coordinate system
and placement in the 3D scene.
The user can be further supported in the process of interactively placing virtual
objects. By using results from stereo vision, the system can impose constraints on
where the user is allowed to specify points representing physical locations in 3D space.
Once the user specifies a point in one image, the epipolar constraint (Shapiro,
Zisserman et al. 1995) determines the line in the second image on which the projection
of this point must lie. The user specification of the point in the second image can be
“snapped” to the nearest point on this epipolar line. Additionally, techniques for
constraining points to be collinear or coplanar with physical edges and surfaces are
available (Kutulakos and Vallino 1996a).
4.1.6 Virtual object rendering
The affine projection matrix Π4×4will correctly render virtual objects for
merging with the video image provided that those objects are represented in the global
affine coordinate system. The projected pixel locations are computed in the
coordinate system of the image plane of the feature tracking system. This 2D
coordinate system needs to be registered with the 2D projection created when the
graphics subsystem renders the virtual objects. There may be an aspect ratio
adjustment and translation that needs to be computed. If this transform is computed
correctly then, given the affine coordinates of a real point, it is possible to render a
virtual marker that will exactly overlay the real point in the merged augmented reality
image. This video-to-graphics transform, Tgv , is computed by knowing the locations
of three marks in both the graphics and video images. The graphics subsystem creates
an alignment pattern that the tracker subsystem digitizes. Figure 21 shows the
alignment pattern we use. After digitizing the image the tracker determines the
location of the three alignment marks. The graphics subsystem provides the location
of the fiducials in its window and the transform Tgv between digitized image frame
and graphics frame is obtained by solving
[g1 g 2 g3 ]= Tgv [i1 i 2 i 3 ] (9)
40
where g1, g2, g3 are the positions used by the graphics subsystem when
rendering the alignment marks and i1, i2, i3 are the corresponding positions in the
feature tracker image plane. The complete set of transformation operations for
rendering a virtual object are shown in Figure 22.
4.1.7 Visual interactions between objects#p#分页标题#e#
In an augmented view of the scene visual interactions between real and virtual
objects must be considered. The affine projection matrix Π4×4 will correctly handle
hidden surface elimination within a virtual object (Figure 23a). It will also cause
rendering algorithms to correctly occlude virtual objects that are behind other virtual
objects (Figure 23b). Next, the visual interaction between real and virtual objects
must be considered. At any given pixel in the augmented image the keyer controls
whether the graphics image of a virtual object or live video image of the real scene is
shown. Using the graphics as the foreground element, or key mask, a luminance keyer
will display the graphics image at every pixel above the luminance key value. The live
Figure 21 - Digitized alignment pattern
3D Euclidean
(object)
coordinates
3D affine
coordinates
Feature tracker
coordinates
Merged video
coordinates
Object-to-affine
transform
Projection
matrix ( Π 4 × 4 )
Tracker-to-video
transform
Figure 22 - Transforms for rendering a virtual object
41
video image is shown whenever a graphics pixel has a luminance value less than the
key value. If the background regions of the virtual graphics image are rendered with a
luminance at or below the key value then the live video is shown in all background
regions and the virtual objects will occlude the video image in the areas where a virtual
object is rendered.
(a) (b)
(c) (d)
Figure 23 - Occlusion in augmented reality scenes
42
Hidden surface removal, where the hidden surface is on a virtual object does
not occur when a real object occludes a virtual one (Figure 23c) because there is no
information about the geometric relationship between these objects (Wloka and
Anderson 1995). If an affine model of a real object is included as another virtual
object and rendered in the background color the occlusions are correctly resolved by
the keyer (Figure 23d). By defining the real object as a pseudo-virtual one the
(a) (b)
(c) (d)
(e) (f)
Figure 24 - Gallery of augmented reality images
43
geometric relationship to the virtual objects is defined. The correct hidden surface
removal is performed by the graphics subsystem in the graphics image and by
rendering in the background color the keyer performs the operation correctly also. A
method for directly creating an affine model for a real object is described in (Kutulakos
and Vallino 1996a).
Figure 24 shows a gallery of augmented reality images. The first image is of
the real scene in our lab. We performed many of our experiments using the frame with
four green feature markers. The rectangular regions on the vertical and horizontal
sides of the frame are there only to provide the viewer with a perspective. Figure 24b#p#分页标题#e#
shows a virtual clock tower merged into the real scene. Our method seamlessly
handles changes in the focal length of the camera viewing the scene as Figure 24c
demonstrates. Figure 24d shows a different orientation of the frame. The last two
images in the figure show a virtual globe placed in the scene and a two-dimensional
version of the system demonstrating an application in building construction or repair.
4.1.8 Animation
A desirable feature for an interactive augmented reality system is the ability to
animate the virtual objects that have been added to the real scene. This is needed to
show motion of the objects in the scene, whether the motion is independent or created
by interactions with the user or other objects. Translations in the scene can be directly
represented in the object-to-world transform O4×4 by a multiplication with a
translation matrix. This matrix follows the standard format used in computer graphics
homogeneous transforms where the translation component is placed in the fourth
column of the matrix. The transform is in the common affine coordinate system and
requires that the translation be specified in that coordinate system. Translations
represented in the Euclidean world coordinate system must be transformed into the
common affine coordinate system. An example of translating a virtual cube in the
affine coordinate space is shown in Figure 25.
Figure 25 - Virtual object translations
44
The standard computer graphics rotation matrix requires that the coordinate
system be ortho-normal. This is, in general, not true of the common affine coordinate
system used to represent the virtual objects. Rotation operations can not be directly
performed via multiplications with standard rotation matrices. A method for
computing arbitrary rotations in the affine coordinate system is described in
(Kutulakos and Vallino 1996b). This method synthesizes the transform for an
arbitrary rotation by first being shown examples of three rotations. This generates
three rotation axes and any arbitrary rotation about those three axes can be composed
into a single rotation transform. With judicious choice of the three rotation examples
the user can compose rotations about meaningful axes in the real scene. The rotations
demonstrated for the work in this thesis do not use the technique just described.
Instead, we compute the rotations in the Euclidean coordinate system defining the
virtual object and then transform the result to the common affine coordinate system by
the object-to-world transform, O4×4 . The advantage of this method is that we can
apply standard rotation transforms. The disadvantage is that the rotation can only be
applied within the Euclidean coordinate system in which the virtual object is defined.
We do not perform any arbitrary rotation about an axis in the common affine#p#分页标题#e#
coordinate system. That requires the more general approach discussed just prior.
4.2 Static Registration
Static registration in an augmented reality image of a real scene indicates how
well the system localizes a virtual object in the three-dimensional world when no
motion exists in the system. This is a measure of the steady state error in the system at
any particular viewpoint. Augmented reality systems must also be concerned with
dynamic errors and the causes and compensation for those errors are discussed in
Section 4.3. In augmented reality systems that are based on position measurements
one of the primary contributors to static registration errors is the position sensor.
Magnetic sensors, such as the Polhemus sensor, are known to provide systematic
errors (e.g. non-uniform position measurements in many workspaces due to
interference from metal objects in the workspace) and statistical errors (e.g.
non-repeatable jitter) (Byrson 1992). A system based on affine representations trades
this source of static error for errors generated by noise in the localization of feature
points and violations of the affine approximation to the camera’s perspective
projection operation.
We assessed the limitation of the affine approximation empirically with the
following experiment. The image projection of seven vertices on a physical object, a
small rectangular box, served as the ground truth. We manually identified the location
of these projections in images taken from multiple camera positions. Four of these
points define the common affine coordinate system and associated affine projection
matrix for each image. We computed the affine coordinates for the remaining three
45
points from their projection in two images using the Affine Reconstruction Property.
The predicted projections of these points were computed in each of the other images
by means of the Affine Reprojection Property. As the camera distance to the object
increased, we increased the focal length of the camera zoom lens in order to keep the
object’s size constant and the registration errors comparable. The camera followed a
roughly circular path around the box in a horizontal plane at distances up to 5 meters
from the box. Figure 26 shows the camera positions used for computing the static
registration errors. The positions are expressed in units of the common affine
coordinate system. The affine coordinates for the test point were computed from two
images near the position (− 1.5 × 104 , 0.5 × 104 ).
Over the range of motions considered, the static registration error remains
within 15 pixels in the 512 × 480 images we processed as shown in the plots of errors
in Figure 27. The data in an error plot corresponds to the positions in Figure 26 with
the same line style. These results show, as expected, that the affine approximation to#p#分页标题#e#
perspective leads to errors as the distance to the object decreases (Boufama, Weinshall
et al. 1994). A projective invariant representation has the potential to reduce the error
at the shorter distances to the object (Section 5.1.2).
4.3 Dynamic Registration and System Latency
Latency in an augmented reality system is a major concern. Several research
efforts (Azuma and Bishop 1994; Holloway 1997) have addressed the issue. System
latency causes the images or haptic feedback to lag behind or “swim around” in the
real scene. User motion triggers a transient response in which the motion of the
−4 −3.5 −3 −2.5 −2 −1.5 −1 −0.5 0 0.5 1
x 104
−3
−2.5
−2
−1.5
−1
−0.5
0
0.5
1
1.5
2
x 104
Affine y−coordinate
Affine x−coordinate
Affine camera position
Figure 26 - Positions of the camera in affine space
during static registration testing
46
virtual objects lags behind the motion of the real scene. The final steady state error at
the new viewpoint is the static registration error for that location. Under continuous
motion, the system latency results in the dynamic registration error. Since the
problems of system latency are most noticeable during more rapid changes in
viewpoint this, unfortunately, is also the time when the user most notices the resulting
discrepancies between his visual and proprioceptive inputs. System latency strongly
undermines the user’s sense of immersion in an environment that is seamlessly
composed of real and virtual objects. It is the largest contributor to dynamic
registration errors (Holloway 1997). Experiments by Ellis, Bréant et. al. (1997) show
that latencies of greater than 50 msec. adversely affect the user’s performance of a
path following task.
4.3.1 Contributors to system latency
There are several factors that contribute to these dynamic registration errors
(Holloway 1997). At the core is whatever processing must be performed to process
input viewpoint or position information, generate the new projection matrix and then
render the virtual objects. In augmented reality systems that are based on position
measurements those sensors (Polhemus Corporation 1996) have traditionally had
update rates that were not fast enough for high fidelity virtual environments
(Adelstein, Johnston et al. 1992). This is another instance where more expensive
−1.5 −1 −0.5 0 0.5 1
x 104
0
5
10
15
Pixel error
Affine x−coordinate
−1 0 1
x 104
0
5
10
15
Pixel error
Affine x−coordinate
−2 −1 0 1
x 104
0#p#分页标题#e#
5
10
15
Pixel error
Affine x−coordinate
−2 −1.5 −1 −0.5 0
x 104
0
5
10
15
Pixel error
Affine x−coordinate
−2 −1.5 −1 −0.5 0
x 104
0
5
10
15
Pixel error
Affine x−coordinate
−2.5 −2 −1.5 −1 −0.5 0
x 104
0
5
10
15
Pixel error
Affine x−coordinate
Figure 27 - Static registration errors at varying camera positions
47
equipment, such as the motion control rigs used to track camera motion for special
effects in motion pictures, can be used if the cost containment goal is ignored. The
newer and faster position sensors are making this less of a problem. Systems that use
video cameras to view the real scene have an inherent one frame (1/30 sec.) delay
getting a frame of video into the framebuffer. A monitor-based or video see-through
display can also introduce a frame of delay in the keying operation depending on the
implementation of the video keyer. The graphics system’s pipelines used for rendering
the virtual objects are often optimized for throughput and do not attempt to minimize
latency (Foley, van Dam et al. 1990). These delay elements are not all serial, in that
some of the processing of position information and/or video data will overlap with the
video operations. For the system implementation described in Section 4.5 the
processing time latencies are in the 70 - 90 msec. range.
4.3.2 Overcoming latency
There are multiple techniques that an augmented reality system uses to
counteract the effects of latency. One technique—or non-technique really—is to
simply wait for the next generation of processor to speed up whatever part of the
operation is processor-bound. In video see-through systems a second approach
compensates for the delays by matching the timing in the two video streams being
merged to form the augmented image. The stream output by the graphics systems is
several video frames behind the video image of the real scene. If a similar number of
frames of delay is placed in the real video stream then the augmented image will
maintain correct temporal registration. Unfortunately, this results in delaying the
entire image the user sees. The haptic system registration must be delayed a similar
amount. The last technique that researchers have tried is to model the user motion and
predict true position based on this model (Zikan, Curtis et al. 1994; Azuma and Bishop
1995). These prediction algorithms require information about the user’s head
position. That data is not available in our system based on affine representations
(Section 4.1). The only data we use as input to the system is the projections in the#p#分页标题#e#
image plane of an uncalibrated camera of feature points in the real scene.
Since modeling head motion is not possible, we performed experiments to
quantify the registration error and to see if simple predictors applied to the feature
point data would bear fruit. Figure 28 shows the apparatus that we used during
testing: it consisted of a high contrast white dot against a black background. We
initialize the test by determining the projection for the white dot painted on the tip of
the nail attached to the frame. We compute the affine coordinates for this point using
the Affine Reconstruction Property after the user has manually specified the projection
of the point in multiple images. Two images is the minimum needed for calculating the
affine coordinates of a point. In these experiments, however, we found that a least
squares approximation using the location of the point in up to 8 images reduced the
initial static registration error to under 1 pixel. Computing the affine coordinates from
48
the minimum two views resulted in errors of 3 to 5 pixels. (This result also has
implications for the general method of defining the placement and object-to-affine
transform described in Section 4.1.5. Our experiments showed that computing the
affine coordinates of the bounding box of the virtual object from the minimum two
views often yielded inaccurate rendering of the virtual objects. A more robust
computation should be made from multiple views.) In each video frame of the test we
projected a virtual marker at the location determined by the test point’s affine
coordinates and the current affine projection matrix using the affine reprojection
property (Section 4.1.3). During the experiments we also tracked the real point in
each video frame throughout the sequence. We used simple thresholding followed by
blob coloring and centroid computation to track the point in each video frame.
Finally, we measured the registration error as the Euclidean distance in the merged
image between the virtual marker and the real point.
We recorded a test sequence approximately 60 seconds long and replayed it for
all of the experiments. The lag between the real point and its reprojection was clearly
seen during test runs. We performed tests with no filtering of the feature points, α-β
filtering, and α-β-γ filtering (Kalata 1984; Brown 1994). The two filters are Kalman
filters with plant models that make a constant velocity and constant acceleration
assumption, respectively. A single parameter called the tracking or maneuverability
index controls filter operation. This generalized parameter is proportional to the ratio
of the position uncertainty due to the target maneuverability to the uncertainty due to
sensor measurement. Larger values of this index indicate a target that is highly#p#分页标题#e#
maneuverable indicating that the position measurements should be more trusted even
when they seem to vary widely. Conversely, smaller values indicate more uncertainty
in the measurement of position from the sensors and a higher degree of faith should be
placed in the values that the system model generates. The filters were run
independently on each feature point. No additional constraint was placed on the data
such as the requirement that an affine structure and motion to be maintained
throughout the sequence (Carceroni, Harman et al. 1998). Adding this constraint
could potentially improve the filtering operation.
Figure 28 - Dynamic registration error experiment
49
During the initial tests, we placed a second marker in the graphic image to
assess how well our simple algorithm was tracking the real point in the video frame.
This mark indicated the detected location of the test point. We observed that this
marker lagged the real test point in the image though not as far as the reprojected
virtual point lagged. During the offline data analysis the location of the test point in
future frames is available and we used this information when computing the error
distance. At each frame in an experimental run, we calculated the error as the
Euclidean distance between the location of the reprojected virtual marker and the
detected position of the real point at the next time interval. Considering the video
hardware that adds at least a one frame delay before a frame of video is available to
the tracker to find the real point this is a reasonable adjustment. The lag in our system
has been measured to be approximately three frames (Section 4.5.1). We observed the
tracked point to qualitatively lag in the augmented image about half the amount of the
virtual point. This qualitative observation combined with our measured latency
provides further justification for the choice of a one frame adjustment as part of the
data analysis.
Figure 29 shows the plots of mean pixel error for two filter combinations.
The mean of the Euclidean distances between the position of the target point in
the video frame and the reprojection of its affine coordinates for several filter
configurations are given in Figure 30. One significant trend the reader should note in
the data is that the mean error consistently decreases for forward prediction values of
2 to 3 frames of video. This data confirms the values for latency that we measured in
the system. It also matches our experience when running the system which from a
visual inspection indicated that 3 frames of prediction gave the best result qualitatively.
The specific method of filtering does not have a significant quantitative effect on the
registration error compared to the effect of the prediction value selected. This may be
due to the plant assumptions of constant velocity (α−β) and constant acceleration#p#分页标题#e#
(α−β−γ) in that neither of them accurately models the non-linear motion of the real
test point through the test sequence. The slightly better results of the α−β−γ filter at
No filter, 0 frame prediction
0
5
10
15
20
25
30
35
1 201 401 601 801 1001 1201 1401 1601
Time (video frame)
Mean error (pixels)
α−β filter (0.75), 3 frame prediction
0
5
10
15
20
25
30
35
1 201 401 601 801 1001 1201 1401 1601
Time (video frame)
Mean error (pixels)
Figure 29 - Sample registration error data
50
smaller prediction values may indicate at better capability for this filter to track the test
point during abrupt changes in direction. Because of the greater susceptibility to noise
in the input data when computing accelerations, the α−β−γ filter performs much worse
at larger prediction values. We also observed during our experiments that qualitatively
this filter was less stable and prone to causing large stretches and shears in rendering
the virtual objects. With no filtering on the input feature points, the addition of
forward prediction qualitatively added an objectionable jitter in the image of the virtual
objects. This was due to noise in the localization of the feature points by the tracker.
Our addition of filtering the feature point data prior to computing the forward
prediction reduced the virtual image jitter. Even at what was qualitatively considered
the best combination (α−β, 0.75, 3 frame prediction) a small number of informal
observers felt that the smaller registration error albeit with a jerkier motion was not an
improvement over the original smoother motion with the larger lags. These observers
considered that it was easier to adapt to and interpret the smooth motion of the objects
than the jerkiness resulting from the forward prediction.
4.4 Haptic Interface
The Phantom provides the haptic interface for our interactive augmented
reality system. This haptic device resembles a small robot arm (Figure 19) that is
driven by motors to provide forces at the end effector, which is a small thimble
surrounding the user’s fingertip. (A stylus end effector is also available but was not
Effect of Forward Prediction on Registration Error
2.0
4.0
6.0
8.0
10.0
12.0
14.0
16.0
0 1 2 3 4
Forward estimation (frames)
Mean Error (pixels)
No filter
Alpha-beta(0.35)
Alpha-beta(0.75)
Alpha-beta(1.25)
Alpha-beta-gamma(0.35)
Alpha-beta-gamma(0.75)
Alpha-beta-gamma(1.25)
Figure 30 - Effect of forward prediction on Registration Error
51
used as part of our thesis work.) Using the supplied GHOST library, we define a#p#分页标题#e#
haptic scene in a manner analogous to defining the graphic scene used for generating
the virtual objects. A tree data structure stores the haptic scene information similar to
the way in which OpenInventor maintains the graphic scene information. In fact, the
VRML format files that we use to define our virtual objects can also define the haptic
scene. Nodes in the haptic scene tree are classified into several categories. The
classifications (including the equivalent nodes in a graphics scene graph given in
parentheses) are:
• Phantom device node (camera node),
• shape nodes that are haptically rendered (point, sphere, spline shapes),
• effects such as dynamics, buzzing, surface characteristics (material
properties, textures).
All these nodes are controlled through the C++ GHOST library provided with the
Phantom. The haptic scene is described in the coordinate reference frame of the
Phantom.
4.4.1 Haptic-graphic interaction
To operate our augmented reality system in a WYSIWYF (what you see is
what you feel) mode, the transform between the haptic coordinate system and the
common affine coordinate system in which all of the virtual graphic objects are
described must be established. Once we establish that relationship it is possible to
exchange position information between the haptic and graphic scene. We need this
exchange of position information so that our system can instruct the Phantom to
generate haptic feedback to the user that is appropriate for the user’s current
interactions with the virtual objects.
Our system computes the Phantom to affine transform,Tap , when it initializes
Phantom. As part of this computation the user moves the Phantom end effector to
four points in the workspace for which affine coordinates are known. In our case,
these points are the four feature points that define the common affine coordinate
system. At each of the four points, the system records the position in the Phantom
coordinate system and after all four positions have been marked solves the following
equation the transform, Tap :
[a1 a2 a3 a4 ]= Tap [p1 p2 p3 p4 ] (10)
where a i and pi are, respectively, the affine coordinates of the points in the
workspace and their corresponding haptic coordinates. The system also computes the
inverse of this transform.
52
4.4.2 Haptic demonstrations
We demonstrated several different interactions with virtual objects. The first
displays a virtual globe in the augmented image. When the globe is stationary (Figure
31a) the user can move their finger over the surface and clearly feel the shape of the
globe as a sphere. The haptic output or display of the Phantom is properly registered
with the visual display of the virtual objects. As the active point of the Phantom
crosses over a land mass the user feels a vibratory sensation to indicate the land. Over#p#分页标题#e#
water areas the surface is compliant giving the user a feeling of sinking below the
water surface. The user can very easily trace the coastline of land masses by feeling
where they exist. Another demonstration spins the globe on its axis. The system
tracks the location of the active point of the Phantom on the globe surface so that
haptic feedback changes in response to both user motions and the spinning of the
globe. The third demonstration with the globe (Figure 31b) allows the user to rotate
the globe. Whenever the user is in contact with the surface of the globe that point of
contact on the globe surface will stay locked to the user’s fingertip. The globe rotates
in response to any motion of the finger.
A tight coupling exists between the graphics scene and haptic scene as Figure
32 depicts. For the globe demonstrations, a Mercator projection map of the world is
divided into a 42 × 21grid, haptic textures assigned to each square depending on its
land/sea ratio and this haptic texture description is remapped onto the sphere. At each
cycle of operation the system obtains the current Phantom position and transforms it
into the common affine coordinate system. This affine point is then transformed into
the Euclidean coordinate system of the virtual object using an inverse of the
object-to-affine transform described in Section 4.1.5. The location of this point in the
texture map of the globe surface determines the appropriate haptic response. The
system sends the correct commands to the Phantom to generate the feedback at the
user’s fingertip.
(a) (b)
Figure 31 - Haptic interactions with a globe
53
4.4.3 Haptic interactions between real and virtual objects
The next demonstration is with a cube virtual object. In Figure 33a,b, the user
is moving the cube around by lifting it with a finger. In the first case, he applies the
lifting force from underneath the cube. The second situation provides the user with a
“magnetic” touch active from above the cube. When the user presses the active point
of the Phantom down on top of the virtual object a click is felt and from that point
3+$17R0
3+$17R0-to-affine
transform
Inverse
object-to-affine
transform
Texture map
transform
3+$17R0
effects command
3D affine
coordinates
3D object
coordinates
2D texture map
coordinates
Figure 32 - Phantom-graphics coupling
(a) (b)
(c) (d)
Figure 33 - Interactions with a virtual cube
54
forward the cube is attached to the user’s finger. The user releases the cube by placing
it on a surface and pressing down slightly. This simulates the push-to-lock,
push-to-release latches that are found on some cabinet doors. The vertical part of the
frame is defined in the graphics scene so that occlusion between that real object and#p#分页标题#e#
the virtual objects takes place as described in Section 4.1.7. This object is also
described in the haptic scene so that haptic interactions take place between real and
virtual objects. In Figure 33c, the user has just rested the cube on top of the vertical
wall. It remains suspended in that position until moved by the user. Figure 33d shows
the cube disappearing behind the vertical wall after being pushed slightly by the user.
It is also possible for the user to play a game of “cube ball” by resting the cube on the
table surface and knocking it into the vertical wall. The cube rebounds off the wall
back to toward the user’s finger. In all these demonstrations with the cube, the system
simulates gravity so that when the user lifts or slides the cube the haptic feedback
includes the sensation of the weight of the cube.
4.4.4 Foreground detection for improved visual occlusion
The images in Figure 31 and Figure 33 show one strong limitation of haptic
interactions in this augmented reality system. This limitation is that the Phantom
provides a very compelling sense of touching virtual objects at the user’s fingertip but
the visual image the user sees in the augmented display is not as compelling. The
primary reason for this is that proper visual occlusions are not occurring between the
virtual objects and the user’s hand. Occlusion is one of the stronger depth cues the
human visual system uses. In these examples the virtual objects always occlude the
user’s hand even when the hand is interacting with a front surface of the object. We
noticed this limitation immediately when the haptic interface was added to the system
and now a red marker, defined as an object in the virtual image, represents the active
point of the Phantom end effector. This “visible virtual fingertip” is defined in the
common affine coordinate system and thus exhibits the proper visual interactions with
the virtual objects. It facilitates the user’s interaction with the virtual objects by being
a substitute for the cues that visual occlusion normally provides.
The discussion in Section 4.1.7 describes the method used for proper occlusion
between real and virtual objects. This method models the real object as a virtual
object rendered below the luminance key value. If this model of the real object is the
front most virtual object then that region of the key signal (Section 3.1.1) matches the
key criterion and video from the real scene displays in the region. This maintains the
correct three-dimensional relationship between the real and virtual objects. To carry
this forward with our haptic subsystem requires the Phantom mechanism to be defined
as a graphic object with actual joint angles monitored during operation controlling its
configuration. However, adding the Phantom as a virtual object still does not provide#p#分页标题#e#
for occlusion of virtual objects by the user’s finger and hand. One could consider
making an approximate model of a finger and hand but the problem of determining its
55
orientation in three-dimensional space remains unsolved since the Phantom end
effector does not have instrumentation to report its orientation. The stylus end
effector is instrumented for orientation but that adds the need to model the stylus and
encoders.
Borrowing a technique used on the Pfinder project at MIT (Wren,
Azarbayejani et al. 1997) for detecting humans moving through a room, we
experimented with the use of foreground/background segmentation in the 2D video
image to identify areas of the image where occlusion by a real object should take
place. The technique initially analyzes the workspace scene gathered over a specified
number of video frames and gathers mean and covariance statistics on the YUV values
of the video signal. We assume that the real scene contains objects that will always be
present while the system is operating. The analysis subsamples the input image by a
factor of 8 in order to maintain a 30Hz processing rate during operation. In each
block of 8 × 8 pixels a single pixel in the center of the block represents the color
information for that entire block. After initialization, when the system is running, the
YUV pixel value of the same point in each subsampled block is checked to determine
if its color is from the population described by the statistics for the same 8 × 8 block.
If the color value is not from that population the block is marked as a foreground
block. The system uses a 90% confidence level for the statistical test and the user has
the capability to modify the threshold at runtime. The system processes video frames
at runtime at approximately 15 Hz. The user can select one of two different statistical
measures. The first gathers mean and covariance statistics on all three individual
components in the YUV color space. This method has problems when the overall
intensity of an area decreases due to shading. The statistics identify the shadow region
as a foreground area. The second statistic method we implemented gathers mean and
covariance statistics on only the UV chrominance components of the video signal
normalized by the luminance Y. This normalized metric is more robust to these
shadow effects. Next, we describe the method we use to obtain the correct visual
interactions between our virtual objects and the real objects that generated the
foreground blocks.
Figure 34 - Foreground mask plane
56
Earlier, this section described how a virtual fingertip can track the position of
the Phantom end effector in the three-dimensional affine coordinate system. If we
extend the concept of this fingertip to be a plane large enough to cover the entire#p#分页标题#e#
scene (shown in Figure 34 only partially) we have a plane that cuts through the
three-dimensional scene. The orientation of this “foreground” plane is taken to be
perpendicular to the viewing direction (Section 4.1.4). We attach this plane to the
active point of the Phantom and combine this plane with the information about the
regions that were found to be statistically different than the same region in the image
of the workspace scene. We assume that all statistically different regions represent
real objects that have entered the workspace and are located in affine space at the
depth of the foreground plane. This assumption provides the mechanism to position
the statistically different blocks, originally detected in the 2D image plane, in
three-dimensional affine space.
To get the proper visual interactions we texture map the foreground plane with
the detected foreground information. This texture map exactly matches the blocks and
subsampling factor that is used during the initial background statistics generation.
Figure 35a shows the foreground plane with detected areas of foreground activity.
Processing the entire video image each frame to find the foreground blocks takes time.
(a) (b)
(c)
Figure 35 - Foreground detection for visual occlusion
57
In order to maintain a 30 Hz processing rate, a subsampling factor of 8 must be
selected. The overall goal here is to find areas where the live video image should
occlude a virtual graphic object. We only need to make this determination in pixel
areas where there are projections of virtual graphic objects. Restricting the
foreground checks to these areas speeds up processing and allows a smaller
subsampling factor of 4. We use the projection of the bounding box of all virtual
graphic objects to define the region in which we perform foreground detection. The
foreground mask in the area where graphics are present is shown in Figure 35b.
We want the virtual graphics image to key the live video into the final
augmented image in all the 8 × 8 foreground block regions that are closest to the
camera in affine space. Remember that we make the assumption that all detected
foreground activity, i.e. a real object that has entered the workspace, is located at the
affine depth of the Phantom virtual fingertip. For the virtual image to key the live
video in a particular region the luminance of the virtual image in that region must be
below the luminance key value. In the texture map applied to the foreground plane we
render a detected foreground block as an opaque block below the luminance key
value. If the active point of the Phantom—and by connection the foreground plane
with its texture mapped foreground blocks—is in front of all virtual objects the opaque
foreground blocks will generate a region below the luminance key value in the final#p#分页标题#e#
virtual image. In contrast, when virtual objects occlude regions of the foreground
plane those objects will appear in the final virtual image and not key the live video in
the augmented image. In areas where we are not doing foreground detection or have
detected no foreground activity we need the foreground plane to have no effect on the
final virtual image or be transparent. We use the common computer graphic technique
of alpha channel blending (Foley, van Dam et al. 1990) to accomplish this. Alpha,
commonly a fourth component—along with red, green and blue—in the specification
of a computer graphic color, is the inverse of transparency. An alpha value of 1.0 is
completely opaque, i.e. it blocks any objects further in depth, and 0.0 is completely
transparent, i.e. it is as if the object was not present in the scene. We set alpha to 1.0
in the foreground blocks and 0.0 in all other regions to get our desired result. The
foreground plane is texture mapped as transparent in regions with no foreground
activity and opaque below the luminance key value in the detected foreground regions.
The final augmented image (Figure 35c) shows the user’s finger properly occluding
the virtual object that it hides.
Our approach uses a plane in the virtual object space to represent where
motion in the scene is taking place. This assumption of all motion occurring in a plane
in space is a gross simplification of reality. To avoid making this assumption requires
information about the depth along the viewing ray for the object projected to each
pixel in the image. There are two augmented reality systems (Wloka and Anderson
1995; Kanade 1996) that use depth maps for resolving visual occlusions. Instead of
having a plane as a virtual object representing the real objects that entered the
workspace, these two systems create what can be visualized as a flexible sheet in the
virtual object space that conforms to the shape and location for all the visible real
58
objects. Only virtual objects that are rendered closer to the camera than the surface of
this sheet are visible in the final augmented image.
4.5 System Implementation
A system that creates an augmented reality interface is a tightly connected set
of components operating in real-time. Figure 36 shows a system diagram of our
interactive augmented reality system. This section describes the implementation of our
augmented reality system based on the techniques detailed in the previous sections of
this chapter. The following sections include details on the hardware we use and a
description of the software architecture.
4.5.1 Tracking subsystem
The tracking subsystem performs all of the image processing required to track
the feature points that define the common affine coordinate system. The input to the
subsystem is the video signal from the camera viewing the real scene. The output is#p#分页标题#e#
the affine projection matrix updated for the current video frame.
An augmented reality system that is of general utility requires operation in a
natural setting. From this, it follows that a system built on our method of affine
9LUWXDO
2EMHFW
*UDSKLFV
6XEV\VWHP
9LGHR
&DPHUD
+DSWLF
6XEV\VWHP
+DSWLF GHYLFH
5HDO
6FHQH
7UDFNLQJ
6XEV\VWHP
9LUWXDO REMHFW
GHVFULSWLRQ
/LYH YLGHR
,PDJH RI
YLUWXDO REMHFWV
3URMHFWLRQ
XSGDWHV
3RVLWLRQ
XSGDWHV
$XJPHQWHG
9LGHR
9LGHR
6XEV\VWHP
Figure 36 - System components of an interactive augmented
reality system
59
representations requires tracking of features in a natural setting. To date we have
greatly simplified the tracking problem to minimize the effort required in that regard.
If these techniques are to be moved out of a laboratory setting a significant effort is
needed to incorporate other more robust feature tracking algorithms. We discuss this
in Section 5.1.4.
We implemented the system with two different trackers. The original, a region
based tracker, runs on a multiprocessor SPARCstation. It requires two high contrast
regions in the scene. The user initializes the tracker by selecting a pixel within each
region. A region growing algorithm determines the outline of the region which is
known to be a rectangle. Several points on each edge are tracked through the video
frames. In each frame, the tracker determines the actual edge by doing a least squares
fit of a line to the points for that edge. The “tracked” feature points are the corners of
the two rectangles. The tracker determines the corners by intersecting the lines
defining each edge. The axes of the common affine coordinate system are computed
using the decomposition method of Tomasi and Kanade (1992). This tracker uses
more than the minimum four feature points needed to define the common affine
coordinate system and thus has some robustness against noise in a least squares sense.
We used our more recent tracker—a color blob based tracker—for most of the
experiments in this thesis work. The change to a color tracker allows features to be
placed in a somewhat more natural setting by applying colored dots in the work areas.
The color tracker is based on a Datacube MV200 with Digicolor digitizer for input
that is hosted on a Sun 3 machine. This image processing computer communicates
with the rest of the augmented reality system via both Ethernet using UDP datagrams
and a serial line connection. Configuration commands are sent to the tracker over the
Ethernet connection. Feature data centroids are communicated back via either
Ethernet or a serial connection. The choice of method is a compile-time option in the#p#分页标题#e#
code for both the tracker and graphics subsystems. Because of variations in
/RRNXS
WDEOH
*DXVVLDQ
S\UDPLG
JHQHUDWLRQ
%ORE
FRORULQJ
&HQWURLG
&RPSXWDWLRQ
)LOWHULQJ DQG
SUHGLFWLRQ
'LJLFRORU
LQSXW PRGXOH
Video
input
Digitized
HSV image
Color
segmented
image
Gaussian pyramid
Blob
segmented
image
Feature
locations
Filtered and
forward predicted
feature locations
Figure 37 - Color tracker block diagram
60
congestion on the house Ethernet that the system is on, we found a small improvement
in system latency when we switched communication to the serial line connection.
Figure 37 is a block diagram for the blob tracking algorithm.
The Digicolor input module digitizes the video signal and codes it into the
hue-saturation-value color space. The ability of the Digicolor to create a digitized
image in this color space is crucial to frame rate color segmentation. The 8 bit hue and
saturation components are the input to a 16 bit lookup table that performs the color
segmentation. The tracker decomposes the binary (0 or 255 value) color segmented
image into a Gaussian pyramid using a 5 × 5 convolution kernel. The images are not
re-binarized after each convolution. The tracker performs the blob coloring and later
stages of the algorithm on the host processor and not in the Datacube system. The
host processor must transfer the pixel data from one level of the gaussian pyramid into
its memory for further processing. Transfers between system memory and Datacube
MV200 memory are relatively slow, averaging less than 200 kbytes/sec. The third
level of the pyramid was the highest resolution image that the tracker can completely
process while maintaining a 30Hz rate. The tracker uses the blob coloring algorithm
from Ballard and Brown (1982). After the tracker performs blob coloring at the third
level of the Gaussian pyramid it could compute a more accurate localization of the
feature centroid by calculating that centroid in the full resolution color segmented
image. Processing at full resolution requires the processor to have extended access to
the Datacube memory. The 200 kbyte/sec bandwidth to Datacube memory is not high
enough to support centroid calculations on the full resolution image at 30 Hz. Due to
this limitation the tracker performs the centroid calculation on the decomposed image
and this, in turn, limits the resolution of feature localization. The minimum feature
that the tracker can detect is in the 8 × 8 pixel size range.
Multiple sources contribute to noise in the localization of the feature point
centroids. One is from the color segmentation lookup table, which generates a sharp
cut-off for color detection. The inputs to the color segmentation look-up table are the#p#分页标题#e#
8 bit hue and saturation values. The output is a binary (0 or 255) color thresholded
image. The tracker creates the look-up table using an instantaneous transition from
unacceptable to acceptable values for hue and saturation. If the edges of this transition
were sloped instead, it should reduce the noise, and resulting jitter, associated with
color thresholding because a small variation in hue or saturation near the acceptance
boundary would not result in large changes in the threshold output. The output of the
look-up table is the input of the Gaussian pyramid decomposition which can handle an
image that is not strictly binary. We did not perform any experiments to test this
potential improvement. A second source of centroid localization error is the spatial
quantization caused by the tracker performing centroid calculations on level three of
the pyramid. The spatial quantization is directly tied to processor cycles and access to
the Datacube memory. A faster host processor and an update to the newer Datacube
MV250 system that has significantly increased the bandwidth between processor and
Datacube memory would allow centroid localization to be done on the full resolution
image. A last source of localization error that we noticed during experimentation is
61
systematic error from the video camera or the Digicolor digitizer. With at least one
video camera we used there is a variation in color segmentation that is frame rate
based. Viewing the color segmented blobs from the Datacube system we noticed a
frame-to-frame alternation between two distinct segmentation patterns. We did not
investigate the exact source for this variation but postulate that it is a systematic
variation in the camera or the digitizer.
In our implementation the tracker transmits the feature centroid locations from
the Datacube host system to a tracker subsystem component that runs on the graphics
workstation. This workstation runs the graphics, haptic and video subsystems (Figure
36). The graphics workstation part performs the interframe correspondence of feature
points and the filtering and prediction operations discussed in Section 4.3.2. It would
logically make sense for these operations to be performed on the Sun 3 computer
hosting the Datacube system. With that arrangement the image processing computer
could be considered, in an abstract sense, as an affine camera position tracker and the
entire tracker subsystem would run on it. We made the decision to separate these
logically connected functions based solely on the capabilities of the available hardware
and the desire to maintain a 30Hz tracking rate. The image processing computer does
not have sufficient power to handle all the operations of the tracker subsystem.
Section 4.5.5 describes the software architecture for the parts of the tracker subsystem#p#分页标题#e#
that run on the graphics workstation.
We measured the system latencies, discussed in Section 4.3.2, by having the
graphics subsystem send a time stamp packet to the tracker subsystem. The graphics
subsystem generates this time stamp using its high speed hardware clock. The tracker
subsystem returns the time stamp in the next packet of feature data transmitted to the
graphics subsystem which then computes the elapsed time. The elapsed time
computed does include the time to send the time stamp packet to the tracker
subsystem. Strictly speaking, the system latency should only be the time from when a
video frame arrives until the video subsystem generates the augmented image based on
the video frame. Our computation thus provides an upper bound on the system
latency. We measured latencies in the 70 to 90 msec. range.
4.5.2 Graphics subsystem
The current graphics subsystem runs on a Silicon Graphics Indigo2
workstation with High Impact graphics and Impact video. The video hardware
component is described in Section 4.5.4. The haptics subsystem (Section 4.5.3) runs
on the graphics processor also. The graphics capabilities of the system are not being
taxed very hard because of the simple nature of the virtual objects being rendered.
The high cycle demands of the haptic subsystem required a reduction in the complexity
of the images. The graphics workstation ran out of processor cycles when the haptics
subsystem was running and the scene contained more than two simple cube or sphere
objects. One example of the reduction in complexity was rendering the globe with
62
larger tessellation (20 sided sphere) than desired. The functionality of the graphics
subsystem which also includes the user interface composes the main software
component of the system and is described in Section 4.5.5.
4.5.3 Haptic subsystem
The visible part of the haptic subsystem is the Phantom haptic device shown in
Figure 19. This device generates force feedback to the finger of the user. It creates a
compelling sense of interaction with virtual objects. Not only can the user feel the
surface texture of objects but weight of the objects is also simulated. The hardware
amplifiers and software drivers for this run on the SGI computer with the graphics
subsystem. Sensable Technologies, the manufacturer of the 3+$17R0™, provides an
interface library named GHOST and we coded to that application program interface.
GHOST is a C++ class library that allows the programmer to define a haptic scene
graph in a manner analogous to the graphics scene graph created by Open Inventor.
Unfortunately, the program must define two separate scene structures. A single one
can not be shared for both purposes. The haptic subsystem software is an integral part
of the graphics subsystem software because of the tight coupling needed between the#p#分页标题#e#
two. Position information is constantly exchanged between the graphics scene and
haptic scene to keep them aligned with each other. Merging the operations for the two
subsystems into a single software process was the best approach to reduce the
interprocess communication that occurs. The software architecture is described in
Section 4.5.5
To maintain the fidelity of the haptic rendering, GHOST starts a servo loop
that runs at high priority and requires 1 kHz service rate. If the servo loop does not
get called within 2 msec. (500 Hz rate) a failsafe mechanism shuts off the force
drivers. The user must restart the augmented reality program because it is not possible
to restore correct Phantom operation after a forced shutdown. The SGI machine
running our augmented reality system is a single processor system. Running GHOST
and the haptic servo on a single processor—along with all the other parts of the
system—places severe limitations on the complexity of the haptic scene the system can
render. An optimal design is to dedicate one processor in a multi-processor
configuration to handle only haptic operations. These limitations are discussed in
Section 5.2.2. Another difficulty working with the GHOST library is that in the
Silicon Graphics environment it is not stable. With version 2.1 the system locks up or
reboots at random times. Sensable Technologies is aware of this problem and will
hopefully solve it in a future release of the software.
63
4.5.4 Video subsystem
The video subsystem is hardware in the Silicon Graphics computer used by the
system. Video inputs and outputs are 4:2:2 525 line digital video that follows the
CCIR-601/SMPTE 602 video standard. The 4:2:2 nomenclature refers to the
sampling rate for the three components, YUV, of the video signal. The luminance, Y,
component is sampled at every pixel while the two chrominance components, U and
V, are sampled every other pixel. We use external A/D and D/A converters to process
standard NTSC analog video through the system. There are two channels of digital
video input and two channels of digital video output.
The subsystem also contains internal hardware for keying and blending two
video signals. The inputs to the blender and keyer can be one of the input video
channels or a graphics window displayed on the workstation console. The
programmer can direct output to the digital video output ports or to a workstation
screen window. The programmer can setup the keyer to operate as either a luminance
or a chroma keyer. The hardware also supports blending between a video input
channel and graphics screen window.
We configure the keyer in the luminance key mode. The virtual image
rendered in a window on the workstation monitor is the key signal that keys the live
video from one of the digital video input ports. Even though there are two video#p#分页标题#e#
inputs and outputs to the video subsystem as a whole, the keyer can only process one
video signal at a time. We set the luminance key value at black. This is the color of
the darkest regions in the background of the virtual graphics image. The keyer keys
the live video signal at every pixel in the graphics image whose luminance value is at
the luminance key value. Any pixel in the graphics image whose luminance value is
above the key value replaces the video pixel at that location in the merged output
image. With this keying method a virtual pixel that is above the luminance key value
always replaces a real video pixel. Note that a pixel in the middle of a virtual object
that meets the keying criterion causes the live video to show through at that spot in the
virtual object. This fact is exploited by the methods discussed in Sections 4.1.7 and
4.4.4 that are used to get a real object to visually occlude a virtual object. We
experimented using the alpha blending in the video hardware to make smoother
transitions and reduce the blocked contour when our foreground detection method
keys live video to occlude a virtual object. The blending we did achieve was visually
less acceptable than the original blocks. (Note that we do successfully use alpha
blending, as discussed in Section 4.4.4, to create a virtual image as the key signal. The
resultant key signal allows real objects to occlude virtual objects. The blending
performed in that case is between virtual objects in the graphics image. The alpha
blending that we could not get to work well is in the keyer itself—between the key
signal and the background live video being keyed.)
Our augmented reality system operates most of the time with a monitor-based
display system (Figure 15). Using either a video or optical see-through display
(Azuma 1997) increases the user’s perception of being present in the augmented
64
reality scene. The technique of augmenting reality with affine representations
immediately lends itself to operation with a video see-through display (Figure 16).
Since neither position information nor camera calibration parameters are needed, we
created a video see-through display by simply attaching cameras to a standard virtual
reality head-mounted display (HMD).
We built our “augmented reality goggles” by mounting two Panasonic
miniature color CCD cameras with 7.5mm lens on a Virtual Research VR4 HMD.
The user must manually adjust the fixtures holding the two cameras to correctly orient
them and obtain a properly fused stereo view of the real scene. This is the only
additional system initialization step needed. Figure 38 shows a block diagram for our
system. Our video hardware supports the augmentation of only one video signal with
an overlay of virtual objects. Note that the system block diagram shows the signals#p#分页标题#e#
from both video cameras being digitized and then rescanned for display in the HMD.
Our arrangement of the video path in this way ensures that the two signals forming the
stereo display of the real scene in the HMD have equivalent processing delays.
As noted above the luminance keyer can only key a single video signal. This
means that while the user can see the real scene in the HMD in stereo the video
subsystem only creates an augmented image for one eye. We made an interesting
observation during informal experiments in the laboratory. Most user’s are unaware of
the lack of augmentation in one eye when the augmented view is presented in the
user’s dominant eye. Only when asked to close that eye did the user notice the
missing augmentation in the non-dominant eye.
Graphics subsystem
Background
Key
Impact Video
SGI High
Impact
Video digitizing
and display
Tracking subsystem
Datacube MV200
w/ Digicolor
Sun
SPARCstation
Ethernet
Luminance keying
Video to
displays
Video from
cameras Left
Affine projection
matrices
HMD & Cameras
Thresholded
color blobs
Augmented image
Right
Virtual
objects
Figure 38 - Block diagram for system incorporating a
head-mounted display
65
4.5.5 Software Architecture
The software implementation for our augmented reality system is divided into
five components: tracker, tracker client, graphic/haptic, haptic servo loop and user
interface. Figure 39 is a block diagram of the software architecture. The architecture
roughly corresponds to the system component diagram shown Figure 36 although the
correspondence between subsystems and software components is not strictly
one-to-one. This section describes the high-level design of the software showing the
relationships between software components and the flow of control in each of them.
The gray boxes are the processes which are each spawned using the Silicon
Graphics IRIX™ system sproc function. This allows all the processes to share a
3+$17R0
Inventor scene
graph (virtual.iv)
Virtual object
scene graph
User Interface
request queue
(UIRequest_t)
Tracker Client
Process
Tracker command
queue
(TrackerCmd_t)
Graphic and
Haptic
Process
Graphics command
queue
(GraphicsCmd_t)
XFORMS-based
user interface
User interface
events
Display updates
Feature data packets
from tracker
(Ethernet or serial line)
Position updates
and force commands
Haptic 1kHz
Servo Loop
GHOST
library
3+$17R0
low-level
interface
Feature point
centroids
Virtual graphics#p#分页标题#e#
operations
Display updates and
error reports
Tracker operation
requests
Graphics operation
requests
Event
Process
High-level
haptic API
Position updates
Configuration
and status
(Ethernet)
Color blob tracker
on MV200
Video
frames
Setup
commands
Video
hardware
Figure 39 - Software architecture diagram
66
common address space and facilitates the exchange of information between processes.
The command and request queues shown are the main interface between processes. A
request is initiated through the queue. Whenever a command or request is placed in a
queue SIGCONT is raised on the receiving process. This will wake up the suspended
process so that it can process the request. During processing of the request auxiliary
data may be exchanged via shared memory. The code is written in C++ but the top
level structure of the program is not object-oriented. Object classes were created
when deemed appropriate. Otherwise, the program follows a procedural design with a
main loop in each process. The flow of control in each of those loops is described in
the following sections.
4.5.5.1 User interface (Event process)
The user interface is based on the Xforms design package—a public domain X
Windows interface design system written by the Physics Department at the University
of Wisconsin - Madison. All the user interaction is through this graphical user
interface. The interface defines callback functions for all of the interface button and
menu elements. The code associated with this process is mainly contained in the file
Event.cc. The user interface event callback functions are defined in virtualUI_cb.cc
and virtualUI.h.
The main loop of the Event process is handled by the Xforms library. It loops
waiting for user actions in the interface windows. When an event occurs the
associated callback function is activated. An idle callback (CheckUIRequests) is
specified during initialization of the user interface. During idle periods this function is
called. If there is a request in the user interface request queue the request is removed
and processed via a large case statement switching on the request type in the
UIRequest_t structure. The process is exited when the user presses the exit button.
4.5.5.2 Graphic/Haptic process
The graphic/haptic process is the main process that starts the system running.
It is responsible for spawning the other processes and initializing the graphics and
video hardware. Once initialization is performed the process enters a loop executing
the operations shown in Figure 40.
The tight coupling between graphic and Phantom processing that was
discussed in Section 4.4.2 can be seen in the main loop processing. The virtual#p#分页标题#e#
graphics will be rendered whenever there is a new affine projection matrix computed.
Since there is also processing that must be done with the Phantom the system tries to
anticipate when the next projection matrix will be available and perform the haptic
interaction processing prior to that time. The time between graphic updates is
measured and the process sets an alarm to raise SIGALRM and wake itself up prior to
that time. This ensures that the haptic update has been performed as near in time to
67
the graphic update as possible. It should be done before the graphic render update
because the current active haptic position may have an effect on the virtual objects.
The source code files that are associated the graphic/haptic process are:
File name Description
virtual.cc Main graphic program. Starts other processes and
initializes graphic and video hardware. Cleanup routines
and signal handlers
classify_background.cc
statistics.cc,
statistics2.cc
Mask.cc
Compute background color statistics and generate the
foreground mask.
GLX.cc Low level interface to graphic hardware using OpenGL.
Needed to augment the capabilities of OpenInventor.
Graphics.cc Initialize OpenInventor, loading of scene graph and object
graph, bounding box operations, computation of
object-to-affine transform
HapticScene.cc Define a blank haptic scene. Set up haptic scene based on
haptic id extracted from object scene file.
If graphics are running
Wait up to 50 msec for an X event in the virtual graphics window
or new video frame to arrive
If an X event arrived
Handle the event. Mainly used to get button clicks on features in
the virtual graphic window to define locations in the augmented
display
If a video frame has arrived
Process the video frame to compute foreground mask if feature
is enabled
Else when graphics is not running
Suspend waiting for signal
If new tracker feature point data has arrived
Process the data to compute new affine projection matrix
Handle timing delay data to determine processing latency
Set alarm for next Phantom update
If Phantom processing is due
Process haptic scene and update the Phantom
If render operation is needed
Compute time to next Phantom update
Perform virtual scene render
If graphic/haptic command or request is in queue
Process command or request
Figure 40 - Graphic/haptic process main loop
68
Phantom.cc Interfacing to GHOST library, processing Phantom
commands, computation of Phantom-to-affine transform
RegError.cc Perform dynamic registration error tests.
TrackedPoints.cc Control display of feature centroid and affine basis, load
affine projection matrix into scene graph
Align.cc Compute graphics-to-video transform#p#分页标题#e#
Video.cc Setup, takedown and all interactions with the video
hardware
4.5.5.3 Tracker Client process
The tracker client process handles all of the interaction with the color blob
tracker. Its main responsibilities are sending configuration and status requests to the
tracker, processing the responses to those requests, and receiving the feature point
data. Requests made to the tracker client include: start, stop and exit; send options
and color segmentation masks; perform alignment operation; initialize the affine basis;
and start/stop filtering or set the filter type. Operation of the main loop in this process
is detailed in Figure 41. This figure shows the operation when the tracker transmits
feature data on the serial channel.
In processing the feature point data this process performs the inter-frame
tracking operation using a simple nearest neighbor algorithm from the current position
to the previous position. There is opportunity here to improve on the inter-frame
correspondence. No cross-check is performed from the previous position to the new
positions. The tracker client also does the filtering and predictive estimation on the
If tracker is on
Wait on data arriving or receiving a signal
If serial channel data available
Process incoming feature data
If socket data is available
While there is socket data
If a receive error
Signal tracker death
Else
Process a reply from the tracker
(alignment, rate update, start confirmation)
Else
Suspend waiting for SIGCONT
If tracker request is in queue
Execute tracker function for the received command
Figure 41 - Tracker client process main loop
69
feature points if those options are active. The values reported to the graphic/haptic
process are the filtered values.
The source files associated with the tracker client process are:
File names Description
TrackerClient.cc Main loop, functions for processing
tracker request, receiving data from
tracker and performing inter-frame
correspondence
AB.cc, ABC.cc α−β, α−β−γ filter code
ABFiltering.cc, ABCFiltering.cc Glue between tracker client and filters
VSDFclass.cc Variable state dimension filter class
VSDF.c Glue to Horatio library implementation of
VSDF
4.5.5.4 3+$17R0™ servo loop
The Phantom servo loop performs the low-level interfacing to the haptic
device. This program is provided as part of the Phantom software distribution. It is
started during initialization of the GHOST library. This program runs as a high
priority process under IRIX. It requests service at a 1 kHz rate and must be serviced
at least at a 500 Hz rate or else a failsafe mechanism shuts down the motor drivers and
terminates all force generation. As of the writing of this thesis, this process will#p#分页标题#e#
randomly hang the processor and/or reboot the machine. We were not able to
determine the exact cause of this problem. The manufacturers of the Phantom are
aware of it and hopefully will resolve it with a future release of their software system.
4.5.5.5 Tracker
The color blob tracker is an ImageFlow program running partly on the
Datacube MV200 system and on the host workstation. The operation of this program
is discussed in Section 4.5.1. This process is spawned on the remote machine
whenever the user requests the system to start the tracker. The tracker client process,
running on the local machine, handles all the interactions with the tracker. The two
systems communicate via Ethernet sockets using UDP datagrams. A compile time
choice allows the tracker to transmit feature point data on a serial line connection. We
implemented the serial line connection because our experience showed that there was
significant variability in transit times on the house Ethernet. The measured delay using
Ethernet transmission, at times, was longer than on the slower serial line connection.
The Datacube program is locked to the video frame rate and is capable of
processing color blob data at 30Hz. Every time through the main loop the tracker
processes a frame of video and checks the Ethernet socket for a request sent by the
70
tracker client. Part of processing the video frame is transmitting the packet of new
feature point data to the tracker client process over either Ethernet or the serial
connection.
The source files that are associated with the color blob detection program are:
File name Description
Tracker.cc Main function. Initializes Datacube
system and processing commands from
the tracker client
TrackerAlign.cc Perform alignment operation.
TrackerColorMask.cc Manage the color mask setting for color
segmentation.
coltr30.c Builds multiple pipes and the pipe altering
threads (PAT’s) that control them.
conv.c Sets the convolution kernel for the
Gaussian pyramid.
blobs.c Blob coloring algorithm
mylib.c Miscellaneous functions
71
5 Conclusions
5.1 Affine Representations: an Attractive Alternative
Augmenting reality using affine representations is an attractive alternative to
the previous methods used by augmented reality systems for registering the real and
virtual scenes. These previous methods (Feiner, MacIntyre et al. 1993b; Janin, Mizell
et al. 1993; Rastogi, Milgram et al. 1995) mostly relied on explicit measurement of the
position of the viewer in the workspace. Methods (Grimson, Lozano-Perez et al.
1994; Mellor 1995a; Neumann and Cho 1996) that did not require position sensing did
require knowledge about the intrinsic parameters of the video camera viewing the
scene or locations of fiducials placed in the image. The simplicity of the affine#p#分页标题#e#
representations method is very appealing, though the technique comes with a set of
new requirements and limitations, namely, the requirement for real-time tracking of
features, the weak perspective approximation, and the use of a non-Euclidean
reference frame. This section discusses these requirements and limitations along with
suggestions for future work to address them.
5.1.1 Tracking as a source of registration errors
Our augmented reality system has two main sources for static and dynamic
registration errors. The entire technique rests on the ability to track multiple feature
points over time in video images. The accuracy of the localization of the feature points
in each video frame directly effects the definition of the common affine reference frame
and in turn the placement of the virtual objects in the scene. This is particularly true in
our system which is run using the minimum number of feature points. Some immunity
to inaccurate feature point localization can be obtained at the expense of tracking more
points in the scene. The tracker can influence both the static and dynamic registration.
As has been mentioned in previous sections errors in the dynamic registration of
virtual objects will give them an appearance of moving around in the scene. Virtual
objects lagging behind the rest of the scene motion is a common problem in all
augmented reality systems. Latencies, starting with the trackers, and then later added
on at any point in the system are a problem. Using 30Hz video input to the trackers
72
there is an immediate one-frame delay waiting for the video image to process.
Executing the tracking algorithm adds an additional delay. In our system the color
tracker adds approximately one additional frame delay.
Tracking has been studied in computer vision research for a long time. Many
tracking algorithms are available that can be considered in place of the color blob
tracking algorithm used in our system. Concentrating on the current system, there are
areas that can be investigated for improvements. During experiments in the lab we
observed that the localization of a blob centroid varies ±1 pixel even with no motion in
the scene. This is caused by jitter in the color segmentation. One area that should be
checked to improve color segmentation is the shape of the window used in the
segmentation lookup table in the Datacube. Currently, this window has a sharp cutoff
which can lead to jitter on the edges of the color field. Reworking this table so that it
represents a window with sloped sides may help.
To improve the latency in the tracker subsystem tracking on fields at 60Hz
should be tried. The Digicolor module used for color acquisition on the Datacube
system unfortunately can not be programmed to do field acquires. Datacube
Corporation was never able to provide information on how field rate acquisition could#p#分页标题#e#
be performed. The assumption has been that it is not possible. An alternative that can
be considered is to switch to using the Cognachrome Vision System for color blob
detection. The Cognachrome, manufactured by Newton Labs, is capable of tracking
color features of sizes similar to that used in our system at a 60Hz rate. This rate can
be maintained with at least 5 blobs in the scene. Tracking a larger number of blobs
will result in decreased performance. The serial communication channel on the
Cognachrome can be interfaced using the serial input mode of the TrackerClient code.
An additional benefit of the Cognachrome vision system is its $2500 cost which is a
factor of ten lower than the cost of a Datacube system.
5.1.2 The affine approximation as a source of registration errors
The affine approximation is a known limitation in our system. Approximating
the projective camera as an affine camera introduces errors. The severity of the errors
can be limited by operating within guidelines of not having feature points too far off
axis, keeping the focal length short compared to the average distance to the feature
points in three-dimensional space and keeping the difference in depth between the
nearest and farthest feature points short compared to the focal length of the lens. We
also assume a perfect lens is in the video camera. A distortion-free lens is rarely the
case with most lens, at the least, exhibiting radial distortion to some degree. Lens
distortion incorrectly projects the feature points into the image plane and will produce
errors in the registration of virtual objects.
One benefit of the affine camera assumption is the simplicity of the
computation of the projection matrix. If the simple affine formulation is kept then the
limits of the affine assumption will be present. One direction to pursue is using a
73
common projective representation instead (Faugeras 1992). A projective
representation requires tracking a minimum of five feature points instead of the four
required for the affine representation. The affine approximation has been shown to
yield more accurate results in structure-from-motion computations than a projective
representation (Wiles and Brady 1996) when the large object-to-camera distance
requirement is not violated. This result warrants future investigation of Wiles and
Brady’s combined appropriateness idea where the most appropriate camera model is
selected for use. Lens distortion can be compensated for by calculating an appropriate
image warp (Mohr, Boufams et al. 1993) or estimating the distortion coefficients in
conjunction with the tracking subsystem using a recursive variable state dimension
filter (VSDF) (McLauchlan and Murray 1996).
5.1.3 Consequences of a non-Euclidean reference frame
The global affine coordinate system defines relative relationships between the#p#分页标题#e#
camera, real scene and virtual objects. This is useful for the purpose of registering
virtual objects in the real scene but does have drawbacks that some researchers
consider significant (Azuma 1997; Koller, Klinker et al. 1997). Since we have only
relative relationship information generated at runtime there is no absolute reference
frame that is known apriori. No metric information about the real 3D world is
obtained, which eliminates the possibility of placing virtual objects based on
measurements in the real scene. The affine coordinates for locations in
three-dimensional space are not known until the common reference frame is defined at
runtime. The virtual objects must be placed interactively after the global coordinate
system has been determined via methods described in Section 4.1.5. An alternative is
to place the virtual objects in the real scene using standard measurements and then at
runtime calculate the transform of the coordinate system that defines the real scene to
the newly defined common affine reference frame. This is the technique employed by
the “one-step cheat” used by our current system. This “cheat” assumes that the
bounding box for the virtual object is the affine coordinate system and thus the affine
coordinates are know without computation via the Affine Reconstruction Property
(Section 4.1.3 ). For this to work, the feature points that define the affine basis points
are placed so that they define a cube in three-dimensional real space.
The global affine coordinate system, in general, is not an orthonormal frame in
space. Operating in a non-orthonormal coordinate system has ramifications for some
computations that must be performed. On the graphics subsystem our work has
demonstrated that projection computations, z-buffer determination of visible surface
and texture mapping can be performed within this affine representation. Other
rendering algorithms, such as lighting computations, that require metric information in
the form of measurement of angles, can not be performed in a straightforward manner
directly in affine space. For some augmented reality systems, such as those addressing
applications in the maintenance and military domains, this limitation on the rendering
74
of virtual objects is not a major issue. Additionally, how to perform the computation
of dynamic behavior for the virtual objects in an affine coordinate system is an open
question. The technique used in this system was to compute the dynamics in the
Euclidean reference frame of the Phantom and then transform the virtual objects into
the global affine coordinate system for rendering. Likewise, real objects that interact
with any virtual objects were defined in the global coordinate system and then
transformed into the Euclidean Phantom coordinate system to determine the haptic#p#分页标题#e#
interactions
5.1.4 Feature tracking: the coign of the method
Augmenting reality with affine representations is limited by the accuracy,
response and abilities of the tracking system. To date we have simplified our tracking
problem by limiting it to tracking high-contrast objects and easily segmented color
blobs. For each video image the tracking subsystem must compute a consistent global
coordinate system. Tracking in a completely natural setting requires better tracking
algorithms or continued engineering of the scene to simplify the problem. We did not
want our work to mutate into a thesis on better trackers. Instead the features were
engineered to make the tracking process easily tractable. More capable tracking
algorithms are available in the literature and can be used within this system.
No results are presented in our work for the situation when the feature tracker
detects more or less than the required number of feature points. The current system
will not generate an affine projection matrix if the tracker does not detect the correct
number of features in an image. The system freezes the image of the virtual object at
its last rendering if the correct number of feature points are not available. Additional
research work is needed to determine a method to generate a stable affine coordinate
system when there are a variable number of feature points from one video frame to the
next. This variation may be due to:
• feature points being occluded for one or more frames,
• a current feature point permanently disappearing, or
• a new feature point appearing in the image.
One promising direction to look for a method to handle this feature point variation is
the Variable State Dimension Filter (VSDF) (McLauchlan and Murray 1995). The
formulation for this recursive Kalman filter allows a variable number of features. It
also enforces the affine structure by considering the feature points to be noisy
observations of the system state defined to be the affine projection matrix. Future
work in this area should also consider the research of Rodrigo Carceroni who has
looked at the most efficient methods to use the VSDF (Carceroni, Harman et al.
1998). The results of his work shows that more accurate filtering of data points can
be obtained if very approximate camera calibration is available. The image feature
75
points are pre-multiplied by the inverse of the approximate camera calibration
transform. This yields points defined in the 3D camera coordinate system. The
filtering is applied to those points rather than the 2D image points that are filtered in
our system. Factoring out the camera projection operation, even if only approximated,
yields more accurate determination of the camera pose.
5.1.5 Class of applications best suited for affine augmented reality#p#分页标题#e#
Applications where there is little apriori knowledge about the scene will benefit
most from our method of augmenting reality using affine representations. Using no
scene knowledge we define the global coordinate system simply by extracting feature
points from the video images. The user interactively places virtual objects with respect
to the global coordinate system at runtime. Also, because of the lack of metric
information and limitations on the algorithms that can be directly used while rendering
the virtual scene ideal applications are those that do not require highly photorealistic
virtual objects to augment the real scene. For example, many applications from the
military domain would match well with this technique. The scenario given for the
Video Surveillance and Monitoring project (Section 2.3.3) is one good application.
Geometric information about the battlefield scene will rarely be available. The ability
to transfer position information from a reconnaissance aircraft to ground forces
through the correspondence of feature points is a very attractive solution.
In applications where apriori knowledge of the structure of the scene is
available a technique that uses the scene information to directly compute a Euclidean
camera position (Neumann and Cho 1996; State, Hirota et al. 1996) may be more
advantageous. The additional metric information eliminates the need to position
virtual objects and create the global affine definition of real objects at runtime. In
addition, lighting calculations can be performed in a straightforward fashion. One
flexibility that is lost, however, is the ability to vary the focal length of the video
camera that is viewing the real scene.
5.2 An Exercise in Software Engineering
An augmented reality system is a complex collection of multiple cooperating
components. To build such a system requires a careful analysis of the system
requirements. We built our augmented reality system using common real-time design
techniques. Often these software engineering considerations are ignored as part of a
research project. One aspect of our work was to demonstrate that with careful
engineering it is possible to build a robust and reliable interactive augmented reality
system. It is a system that is modular in design and can have new components added
to it without requiring a redesign of major components. We added the haptic
76
subsystem toward the end of the development cycle and we accomplished initial
integration in the relatively short period of two days because of the modular design.
5.2.1 Designing for minimum latency
The system implementation description in Section 4.5 highlighted the result of
many of the design choices we made during the building of our augmented reality
system. Latency (Section 4.3) has been seen to be a major concern for generating a#p#分页标题#e#
high-fidelity augmented reality display. We designed the architecture around several
standard techniques used for building complex software systems. The techniques used
in the architecture of the system that helped maximize its performance include:
• Multi-threaded architecture. There are five process threads in this system:
feature tracker, tracker client, graphic/haptic application, haptic servo and
user interface. This architecture was decided upon to improve response
time for the individual operations. Commands and requests are passed
between threaded processes through queues. The alternative would have
been a single monolithic loop architecture. Because there were several
activities of the program that required waiting for data a loop architecture
would not give adequate service to all of the system components. This
comment is particularly true for the user interface functionality. With a
single threaded system processing of tracker data and the updating of the
affine projection matrix would be halted whenever user interface activity
was taking place. Or on the other side of the coin, the user interface would
not be able to respond at all to user actions if other components of the
system were using all of the available processor cycles. The multi-threaded
design prevents any one component from using all the processor cycles.
The individual threads are full weight Unix processes sharing a common
address space. We performed an experiment to determine if improved
performance could be obtained using lightweight POSIX compliant
pthreads. We abandoned this direction was abandoned because the current
IRIX implementation of pthreads is not functioning correctly. When a new
release of the OS is made the potential benefits of this change can be
reconsidered.
• Event driven programs. When the program was originally built, we
observed CPU utilization close to 95%. This was in an early stage of the
design before all of the graphics or any of the haptic operations were in
place. The user interface was very sluggish in response and adding more
functionality seemed unlikely. These processes spent most of their time
spinning on input. We adopted an event driven architecture to minimize
idle spiining. The tracker client, graphic/haptic and user interface were all
77
changed to trigger on events. One event that all three respond to is a new
message in their respective command or request queues. The tracker client
also waits on a select for new data from either the serial channel or
network socket that connects it to the feature tracker. With this design
CPU load normally runs in the mid-20% range with the graphics objects
typically used and the haptic system not running. When the haptic servo
loop is active the utilization is almost 90%. Not spending resources on#p#分页标题#e#
waiting processes provides the necessary processor cycles for all of the
operations especially the haptic servo loop. Only if the system was running
on a multi-processor machine could a non-event driven architecture be
considered.
• Shared-memory data transfers. All processes running on the Silicon
Graphics machine operate in a single address space having been created
using the IRIX sproc system function. This permits easy sharing of data
between the threads. The architecture does use a limited number of global
variables preferring instead to exchange information between threads using
the command and request queues. This provides a clean interface and, for
the most part, a single interface point and method for all operations. It
made adding new features an easy task. There was a standard set of
coding operations for adding a new command or request. This eliminated
most need for new design work to work new features into the
multi-threaded architecture.
5.2.2 Incorporating haptic technology
The choices for haptic technology for an augmented or virtual reality system
are rather limited. Large scale body-suit exoskeletons can provide gross level force
sensations to the user. To handle finer manipulation tasks we choose a smaller scale
haptic system. The haptic servo loop is a large processor hog. It executes at a 1 kHz
rate and will shut down if it is not serviced at a 500 Hz minimum rate. The GHOST
library has the nice feature that it can read a VRML file as input. This could provide
the ability to have the graphics and haptic scenes defined from the same source.
Unfortunately, the R4000 processor available for our work can not render more than a
very simplistic haptic scene. The standard clock tower that we often use as a virtual
object can not be haptically rendered without drastic trimming of its VRML file down
to a set of no more than a handful of objects. Four or five cubes, spheres or other
simple shapes was the limit of the processor. Operation in a multi-processor machine
can almost be considered a requirement for using the Phantom One processor alone
would be dedicated to running the haptic servo loop and other haptic functions.
The Phantom provides a very compelling sense of touching virtual objects
especially when there is no conflict with the visual cues. In an augmented reality
78
environment conflicts do occur when proper occlusions between the real Phantom and
the virtual objects do not occur. The method we investigated with color background
detection and masking of the video has promise. Improvement of this technique
should be considered for future work. There are many single block errors in the mask.
Single block errors in the middle of the mask or along the edges could be handled by
erosion and dilation morphological operations. We did not experiment with applying#p#分页标题#e#
morphology as part of our work. Alternatively, a deformable snake defined using
nurbs—a graphic object with hardware rendering support—could be used to track the
detected foreground area. This would take care of both interior holes and jagged
contours. Another direction we did not pursue is modeling the Phantom in the
graphics system and generating the occlusions from the graphics side instead of at the
image plane pixel level. Modeling the Phantom device has the disadvantage of not
handling occlusions generated by the user’s finger and hand. A combination of both
techniques should be investigated.
5.3 A System that Works Surprisingly Well
The overall operation of our augmented reality system is very good—
considering the simplicity of the underlying technique. This is despite some very
obvious flaws. The two flaws that seem the most glaring are: noisy feature tracking
and a very rough method for computing the relationship between the haptic coordinate
system and the common affine coordinate system. As we noted in Section 5.1.4, we
simplified the low-level tracking problem by selecting features that could be easily
detected in the video images. The color feature segmentation is visibly noisy and one
to two pixel jitter in the localization of features can be seen when the system is
running. Any improvements made in feature tracking will directly help improve
registration accuracy. The system is also operating with the minimum number of
feature points needed to define the common affine coordinate system. Using more
than the minimum number of points would provide some robustness to individual
errors in feature point localization. This would also allow the system to use the
英国留学生科技哲学dissertation定制benefits of the VSDF formulation mentioned in Section 5.1.4.
Computing the transform between haptic and affine coordinate systems is
performed by having the user move the end effector of the Phantom to the location of
the four feature points defining the affine coordinate system. This is a very rough
alignment operation. The active point of the end effector is in the middle of the user’s
finger. A compensation for this offset is added to the end effector location during the
alignment operation but it is not a precise procedure. Despite this the registration of
the graphic and haptic scene was never a source of problems for the user of the system
during informal testing in the laboratory.
79
5.3.1 Qualitative comments
The generated augmented reality display is very convincing to the user. This is
particularly true when using the HMD setup (Figure 38). A small number of users did
experience problems generating a fused image of the real scene and for them the
monitor-based system was better. Improvements in HMD technology and changing#p#分页标题#e#
the particular color cameras we used to newer models should improve that situation.
Also, the method for fusing the video image of the real scene was to do a rotation of
the two viewing cameras. This will generate a fused image at only a single working
distance. Some users had trouble maintaining the stereo image because of changes in
depth to the scene. They could not, for example, tilt their head up and view a more
distant lab area in stereo without adjusting the cameras. The more correct method to
create a fused stereo image is to adjust the cameras to match interocular distance of
the users pupils. This would require a bit more complex fixture to be used for
mounting the video cameras to the HMD. Current technology for the miniature
“lipstick” video cameras does not provide for auto-focus. This will remain a limitation
for operating in an environment with widely varying distances in the work envelope.
The extent of realism of the display even with the monitor-based system can be
gauged by a common question asked by visitors viewing a lab demonstration of the
system. Upon seeing the augmented image and getting a short description of the
technique we use they will ask how the system can continue to operate when some of
the feature points are being occluded by the virtual objects. The display is convincing
enough that they begin to think that the video camera is seeing the augmented scene.
This highlights how important occlusion is as a visual cue. Knowing that this is an
important cue it is not surprising that the realism of the augmented image decreases
significantly when proper visual occlusions between virtual and real objects is not
performed. This is particularly true with Phantom operation. Without the small
virtual fingertip (Section 4.4.4) to orient the user to the active position of the Phantom
end effector in the scene using the haptic subsystem would be more difficult.
The relative simplicity of the haptic scene that can currently be rendered is a
limitation to performing real world tasks with our system. Internally the graphics and
haptic scenes are separate data structures. Defining the interaction between these
objects is a limitation of the system. The GHOST library provides an interface to the
Phantom that is above the raw device level. Even with this, each one of the haptic
demonstrations that we created required hard coded sections of code to initialize the
demonstration and perform the interactions between the graphics image and the
Phantom A higher abstraction level is needed to increase the productivity of the
programmer of these systems. This comment is not specific to an augmented reality
system. It also applies to virtual reality systems that use this haptic subsystem.
80
5.3.2 Quantitative registration error studies
Our quantitative work centered around the primary challenge for augmented#p#分页标题#e#
reality, namely, improving the registration error. Using unfiltered feature point
localizations, the virtual objects do not remain visually fixed in the three-dimensional
space. Small object jitter is present even when there is no motion in the system. This
is due to noise in the color segmentation of the feature trackers. Section 4.5.1
discusses potential sources for this noise. When there is motion the objects appear to
be moving from their fixed location in the scene. This motion is a very smooth motion
and appears as a lag in that the object is behind its correct position as it moves.
Filtering the feature points helps with the object jitter at the slight expense of response
time. Usually making an assumption of constant velocity motion is not very effective
for the non-linear motions that are present in this system. It was surprising that the
assumption did work as well as it did and cut the registration error by a factor of 2.
The reduction in error is offset by an increase in jerkiness of the virtual object motion
due to sensitivity of the first derivative operation to noise in the input. Depending on
the application it may actually be preferred to use unfiltered operation, if the smooth
lags can be tolerated better than the more jerky object motion obtained with filtering.
Even with the best filtering and predication that could be applied, registration
errors in our system are still easily detected by the viewer. The overall error is
composed of both static errors, due to tracking error and violation of the affine
approximation, and dynamic errors, due mainly to system latencies. The affine camera
approximation places an inherent lower bound on the registration error that can be
achieved for a particular position in the workspace. To go beyond this the affine
approximation will need to be eliminated. Despite that, the method of augmenting
reality using affine representations that we demonstrated is good enough for less
critical applications. It will require more work if it is to be applied to any application
in which misregistration can cause critical errors. Those applications, which would
include most medical applications, can consider using affine representations only after
more research has been done to improve the method’s overall accuracy.
5.4 The Elusive Augmented Reality Interface
The registration problem in augmented reality still has many areas for
continuing research activities. This problem is a difficult one to solve and is likely to
remain that way. Our work presented a novel approach for performing the coordinate
system registration but it has not solved the problem because of several limitations.
Future work is needed to extend this method so it can more closely match the
performance goals stated in Section 2.4. Particular shortcomings with respect to these#p#分页标题#e#
goals and possible directions to find solutions include:
81
Desired Goal
• operate in a completely natural
environment
• reduce latencies
• handle a variable number of
feature points
• not be limited by the affine
approximation
Area requiring work
Î improved feature tracking
Î better filtering, faster hardware
Î trackers robust to occlusions
Î projective representation
The fact that the system interacts with the real world adds an extra level of
difficulty to the augmented reality problem. The number of researchers working in
augmented reality is small compared to, for example, the number of researchers
working in the closely associated virtual reality area. Considering the crucial
registration problem there is no recent quantitative work on errors. The work of
Holloway (Holloway 1997) still provides the only careful assessment of registration
errors in an augmented reality system. Research activity is slowly moving from the lab
into the real world, as seen in, the manufacturing application at Boeing and the image
guided surgery at MIT and Brigham and Woman’s Hospital. Progress in that direction
will continue as current research activities bear fruit. There still is lots of fertile
ground for exciting research work in augmented reality.
82
6 Summary, Contributions and Future
Work
The work we discussed in this thesis is in the area of augmented reality, which
is a relatively new field within the wider virtual reality research area. We discussed the
performance goals for an ideal augmented reality system. These goals place additional
demands on an augmented reality system compared to a fully immersive virtual reality
system. Our thesis work provides a new solution for the registration problem which is
faced by all augmented reality researchers and also shows that within that framework
many of the other performance goals can be achieved. This chapter summarizes the
demonstrated results and contributions of this work.
6.1 Demonstrated Results
Our work demonstrated that it is possible to create an augmented reality
system, composed of multiple subsystems, that operates in real-time. Our system
correctly registers the virtual objects with the view of the real three-dimensional world
using an affine representation for all objects. This registration is effected without any
knowledge of the intrinsic or extrinsic parameters of the video camera that is viewing
the scene. In addition, the system does not use any form of explicit position tracking
to determine user motion within the workspace. We demonstrated the full integration
of a haptic subsystem with the other components in our augmented reality system.
This haptic subsystem provides the user with the ability to touch virtual objects and#p#分页标题#e#
feel forces that accurately represent a natural interaction with the virtual object. Our
work also demonstrated that within this framework visual and dynamic interactions
between virtual objects and real objects are correctly performed.
83
6.2 Contributions of this Thesis
6.2.1 Affine representations for augmented reality
The primary challenge for an augmented reality system is to determine the
proper rendering and registration of the virtual objects that will be merged with the
view of the real scene. This requires computation of the relationships between
multiple coordinate systems. Most augmented reality systems use methods that
transform these coordinate systems into a common 3D Euclidean frame relying on
position sensing, camera calibration and knowing the 3D locations of fiducial markers
in the scene. By determining the relationship of the multiple coordinate systems to a
common non-Euclidean affine reference frame this system is able to determine the
camera pose with neither an explicit position measurement nor calibration of the video
camera viewing the scene. The registration problem is reduced to:
• real-time tracking of a set of four or more points that define a global affine
coordinate system,
• representing the virtual objects in the common affine coordinate system,
and
• computing the projections of virtual points in each video image as linear
combinations of the projections of the affine basis points.
6.2.2 Realistic interactions with virtual objects
Using an affine representation to solve the registration problem, our work also
showed that an augmented reality system can provide realistic interactions with the
virtual objects that augment the user’s view of the real scene. These interactions
include correct visible occlusion of real objects by virtual ones and virtual objects by
real ones. It is not completely seamless, however, in that the dynamic interactions are
not computed in the affine coordinate system. Instead the interactions are performed
in a Euclidean coordinate system and then transformed into the global affine
coordinate system for registration with the virtual graphic objects. Using the Phantom
as a force output device, the realistic interactions with the virtual object included the
ability to:
• sense touching a virtual object in the correct location in space for its
placement in the three-dimensional real scene,
• feel the “weight” of a virtual object when it is lifted,
• feel surface texture on a virtual object, and
84
• feel the force of collisions of virtual objects with real objects.
6.2.3 Analysis of static and dynamic registration errors
We performed an analysis of the static and dynamic registration errors that
result from using the method of affine representations in an augmented reality system.#p#分页标题#e#
In regions in which the affine approximation was not violated, i.e. large
camera-to-object distances, the static reprojection errors were less than 3 pixels in a
experiment with camera distances ranging up to approximately 5 meters using
manually tracked feature and test points (Figure 26, Figure 27). The errors increased
to a maximum of 15 pixels for closer distances as expected from the affine camera
approximation. We measured dynamic registration errors for our method. Absolute
quantitative measures are highly dependent on the motion used during the experiment.
We recorded pixel errors in excess of 30 pixels for some rapid motions. In the one
test sequence we used for our experiments, the mean pixel error for the base system is
11.9 pixels. Simple predictive filtering with forward estimates of three frames
improves the dynamic performance of the system by a factor of 2 to 3 (Figure 30).
We see this improvement for the unfiltered case and when we apply
α−β or α−β−γ filtering. This validated our qualitative assessment of the system and
the quantitative timing measurements that show a 90 msec. system latency. The
improvement in performance does come with a loss in smoothness of virtual object
motion, however.
6.2.4 System architecture
We have shown a system architecture demonstrating that an interactive
augmented reality system can be built to run in real time. Our system is capable of
correctly registering the real and virtual images and giving the user the capability to
interact with the virtual objects in a natural manner. Our architecture is a contribution
in that it can be used as a framework upon which to build future research activities in
augmented reality.
6.3 Future Work
There are many opportunities for continued research activity in augmented
reality. Many problems still remain unsolved. These opportunities exist in the topic
area in general and also more specifically in continuing work started by this thesis.
Some of these future projects potentially include:
85
• Trackers - The tracker that we use can be improved in a number of ways.
Work on the color segmentation would improve the jitter in localization of
feature points. Switching to a faster tracker, such as the Cognachrome
Vision System our department purchased, would improve system latencies.
To move into a more natural setting will require the use of trackers that can
detect and track natural features. In addition, robustness to feature point
occlusions will remove some of the restrictions that currently exist in our
system. Handling feature point occlusions will most likely require operation
with more than the minimum number of points needed to define the basis.
Having more features will improve the noise immunity due to the
overdetermined nature of the system.#p#分页标题#e#
•Affine representations - There are a number of limitations to the use of
affine representations. Switching to a projective representation will allow for
improved operation in some regions of the workspace. A better approach
might be a hierarchy of representations along the lines of Wiles and Brady’s
(1996) combined appropriateness. For some applications, it is worth
investigating some recent results (Li, Brady et al. 1996; Carceroni, Harman et
al. 1998). These results indicate that better estimation of motion parameters
can be obtained when some information, even if only approximate, is
available for the intrinsic parameters of the camera and the scene structure.
• Haptic Interface - No pun intended, the surface has barely been scratched
on the use of a haptic interface in augmented reality. There are many more
areas for investigating interactions between virtual objects and real objects.
How can this technology be incorporated into the application domains
mentioned in Chapter 2? Can the dynamics be performed directly in the
common affine coordinate system rather than have to be converted from a
Euclidean coordinate system? The foreground detection used to resolve
occlusions can be improved. Currently, there are many single block holes in
the center of detected regions of motion. The contour of a foreground region
is also jagged. Morphological operations would clean up these errors in
foreground detection or perhaps the contour can be defined by a deformable
snake.
We hope that some of these ideas for future work will spark a succession of
researchers to continue the work in interactive augmented reality that was started with
this thesis.
86
Bibliography
Adelstein, B. D., E. R. Johnston and S. R. Ellis (1992), "A Testbed for Characterizing
Dynamic Response of Virtual Environment Spatial Sensors," In Proceedings of 5th
Annual Symposium on User Interface Software and Technology, pages 15-21, 1992.
Ahlers, K., D. Breen, C. Crampton, E. Rose, M. Tuceryan, R. Whitaker and D. Greer
(1994), "An Augmented Vision System for Industrial Applications," Technical
Report ECRC-94-39, European Computer Industry Research Center (ECRC) 1994.
Ahlers, K. H., A. Kramer, D. E. Breen, P.-Y. Chevalier, C. Crampton, E. Rose, M.
Tuceryan, R. T. Whitacker and D. Greer (1995), "Distributed Augmented Reality
for Collaborative Design Applications," Technical Report ECRC-95-05, European
Computer Industry Research Center 1995.
Aukstakalnis, S. and D. Blatner (1992), Silicon Mirage - The Art and Science of
Virtual Reality, Berkeley, CA: Peachpit Press.
Azuma, R. (1993), “Tracking Requirements for Augmented Reality,”
Communications of the ACM, 36(7):50-51.
Azuma, R. (1995), SIGGRAPH '95 Course Notes: A Survey of Augmented Reality,#p#分页标题#e#
Los Angeles: Association for Computing Machinery.
Azuma, R. and G. Bishop (1994), "Improving static and dynamic registration in an
optical see-through hmd," In Proceedings SIGGRAPH '94, pages 197-204, 1994.
Azuma, R. and G. Bishop (1995), "A frequency-domain analysis of head-motion
prediction," In Proceedings of SIGGRAPH 1995, pages 401-408, 1995.
Azuma, R. T. (1997), “A Survey of Augmented Reality,” Presence, 6(4):355-385.
Bajura, M. and U. Neumann (1995), “Dynamic Registration Correction in Video-
Based Augmented Reality Systems,” IEEE Computer Graphics and Applications,
15(5):52-60.
Balcisoy, S. and D. Thalman (1997), "Interaction between Real and Virtual Humans in
Augmented Reality," In Proceedings of Computer Animation '97, pages 31-38, 5-6
June 1997.
Ballard, D. H. and C. M. Brown (1982), Computer Vision, Englewood Cliffs:
Prentice-Hall, Inc.
87
Barrett, E. B., M. H. Brill, N. N. Haag and P. M. Payton (1992), "Invariant Linear
Methods in Photogrammetry and Model-Matching," In J. L. Mundy and A.
Zisserman, editors, Geometric Invariance in Computer Vision, 277-292. Cambridge,
MA: The MIT Press.
Betting, F., J. Feldmar, N. Ayache and F. Devernay (1995), "A New Framework for
Fusing Stereo Images with Volumetric Medical Images," In Proceedings of
Computer Vision, Virtual Reality, and Robotics in Medicine '95, pages 30-39, 1995.
Boufama, B., D. Weinshall and M. Werman (1994), "Shape from motion algorithms: a
comparative analysis of scaled orthography and perspective," In Proceedings of the
European Conference on Computer Vision, pages 199-204, 1994.
Breen, D. (1995), Augmented Reality for Mechanical Maintenance and Repair.
http://www.ecrc.de/research/uiandv/gsp/ECRCToday/mechrep.html (Current as of
January 1998).
Brooks, F. P., M. Ouh-Young, J. J. Batter and P. J. Kilpatrick (1990), “Project
GROPE - Haptic Displays for Scientific Visualization,” Computer Graphics,
24(4):177-185.
Brown, C. M. (1994), "Tutorial on Filtering, Restoration, and State Estimation,"
Technical Report TR534, Department of Computer Science, University of
Rochester, September 1994.
Byrson, S. (1992), "Measurement and calibration of static distortion of position data
from 3D trackers," In Proceedings SPIE Vol. 1669: Stereoscopic Displays and
Applications III, pages 244-255, 1992.
Capin, T. K., H. Noser, D. Thalmann, I. S. Pandzic and N. M. Thalmann (1997),
“Virtual Human Representation and Communication in VLNet,” IEEE Computer
Graphics and Applications, 17(2):42-53.
Carceroni, R. L., C. Harman, C. K. Eveland and C. M. Brown (1998), "Design and
Evaluation of a System for Vision-Based Vehicle Convoying," Technical Report TR#p#分页标题#e#
678, Department of Computer Science, University of Rochester, January 1998.
Caudell, T. P. (1994), "Introduction to Augmented Reality," In SPIE Proceedings Vol.
2351: Telemanipulator and Telepresence Technologies, pages 272-281, Novmeber
1994.
Cavallaro, R. (1997), “The FoxTrax Hockey Puck Tracking System,” IEEE
Computer Graphics and Applications, 17(2):6-12.
Corby, N. R., Jr. and C. A. Nafis (1994), "Augmented reality telemanipulation system
for nuclear reactor inspection," In Proceedings SPIE Vol. 2351: Telemanipulation
and Telepresence Technologies, pages 360-365, 31 October -1 November 1994.
88
Dinsmore, M., N. Langrana, G. Burdea and J. Ladeji (1997), "Virtual Reality Training
Simulation for Palpation of Subsurface Tumors," In Proceedings of the IEEE 1997
Virtual Reality Annual International Symposium, pages 54-60, 1-5 March 1997.
Drascic, D., J. J. Grodski, P. Milgram, K. Ruffo, P. Wong and S. Zhai (1993),
"ARGOS: A Display System for Augmenting Reality," In Proceedings of InterCHI
93 Conference on Human Factors in Computing Systems, page 521, 1993.
Durlach, N. I. and A. S. Mavor, Eds. (1995), Virtual Reality: Scientific and
Techological Challenges. Washington, D.C.: National Academy Press.
Ellis, S. R., F. Bréant and B. Menges (1997), "Factors Influencing Operator
Interaction with Virtual Objects Viewed via Head-mounted See-through Displays:
viewing conditions and rendering latency," In Proceedings of the IEEE 1997 Virtual
Reality Annual International Symposium, pages 138-145, 1-5 March 1997.
Ettinger, G., E. Grimson, T. Kapur, R. Kikinis, M. Leventon, T. Lozano-Perez, J. P.
Mellor, S. Wells and S. White (1998), Image Guided Surgery Home Page.
http://www.ai.mit.edu/projects/vision-surgery/surgery_home_page.html (Current as
of January 1998).
Fabiani, L., G. Burdea, N. Langrana and D. Gomez (1996), "Human interface using
the Rutgers Master II force feedback interface," In Proceedings of the IEEE 1996
Virtual Reality Annual International Symposium, pages 54-59, March 1996.
Faugeras, O. D. (1992), "What can be seen in three dimensions with an uncalibrated
stereo rig?," In Proceedings of Second Euopean Conference on Computer Vision,
pages 563-578, 1992.
Feiner, S., B. MacIntyre, M. Haupt and E. Solomon (1993a), "Windows on the
World: 2D Windows for 3D Augmented Reality," In Proceedings of ACM
Symposium on User Interface Software and Technology, pages 145-155, 1993a.
Feiner, S., B. MacIntyre and D. Seligmann (1993b), “Knowledge-Based Augmented
Reality,” Communications of the ACM, 36(7):53-62.
Feiner, S., B. MacIntyre and D. Seligmann (1995), KARMA.
http://www.cs.columbia.edu/graphics/projects/karma (Current as of January 1998).
Foley, J. D., A. van Dam, S. K. Feiner and J. F. Hughes (1990), Computer Graphics#p#分页标题#e#
Principles and Practice, Reading, MA: Addison-Wesley Publishing Co.
Fraunhofer Institute for Computer Graphics (1997), IGD A4 - Augmented Reality.
http://www.ecrc.de/staff/gudrun/ar/london/Lond.html (Current as of January 1998).
Gibbs, S. (1995), GMD Digital Media Lab: Virtual Studio.
http://viswiz.gmd.de/DML/vst/vst.html (Current as of January 1998).
Grimson, W. E. L., G. J. Ettinger, S. J. White, P. L. Gleason, T. Lozano-Perez, W. M.
W. III and R. Kikinis (1995), "Evaluating and Validating an Automated Registration
89
System for Enhanced Reality Visualization in Surgery," In Proceedings of Computer
Vision, Virtual Reality, and Robotics in Medicine '95, pages 3-12, 1995.
Grimson, W. E. L., T. Lozano-Perez, W. M. W. III, G. J. Ettinger, S. J. White and R.
Kikinis (1994), "An Automated Registration Method for Frameless Stereotaxy,
Image Guided Surgery, and Enhanced Reality Visulatization," In Proceedings IEEE
Conference on Computer Vision and Pattern Recognition, pages 430-436, 1994.
Hoff, W. A., K. Nguyen and T. Lyon (1996), "Computer Vision-Based Registration
Techniques for Augmented Reality," In Proceedings SPIE Vol. 2904: Intelligent
Robots and Computer Vision XV: Algorithms, Techniques, Active Vision, and
Materials Handling, pages 538-548, November 1996.
Holloway, R. L. (1997), “Registration Error Analysis for Augmented Reality,”
Presence, 6(4):413-432.
Janin, A. L., D. W. Mizell and T. P. Caudell (1993), "Calibration of head-mounted
displays for augmented reality applications," In Proceedings IEEE Virtual Reality
Annual International Symposium '93, pages 246-255, 1993.
Jannin, P., A. Bouliou, J. M. Scarabin, C. Barillot and J. Luber (1997), "Visual
matching between real and virtual images in image guided neurosurgery," In
Proceedings SPIE Vol. 3031: Medical Imaging 1997: Image Display, pages 518-
526, 23-25 February 1997.
Jebara, T., C. Eyster, J. Weaver, T. Starner and A. Pentland (1997), "Stochasticks:
Augmenting the Billiards Experience with Probabilistic Vision and Wearable
Computers," Technical Report TR-439, MIT Media Lab, October 1997.
Kalata, P. R. (1984), “The Tracking Index: A Generalized Parameter for α−β and α−
β−γ Target Trackers,” IEEE Transactions on Aerospace and Electronic Systems,
AES-20(2):174-182.
Kanade, T. (1996), Z-Key: A New Method for Creating Virtual Reality.
http://www.cs.cmu.edu/afs/cs/project/stereo-machine/www/z-key.html (Current as
of April 1996).
Kim, W. S., P. S. Schenker, A. K. Bajczy, S. Leake and S. Ollendorf (1993), "An
Advanced Operator Interface Design with Preview/Predictive Displays for Ground-
Controlled Space Telerobotic Servicing," In Proceedings of SPIE Vol. 2057:#p#分页标题#e#
Telemanipulator Technology and Space Telerobotics, pages 96-107, 1993.
Koenderink, J. J. and A. J. van Doorn (1991), “Affine Structure from Motion,”
Journal of the Optical Society of America A, 8(2):377-385.
Koller, D., G. Klinker, E. Rose, D. Breen, R. Whitaker and M. Tuceryan (1997),
"Real-time Vision-Based Camera Tracking for Augmented Reality Applications," In
Proceedings of the Symposium on Virtual Reality Software and Technology, pages
87-94, September 1997.
90
Kutulakos, K. N. and J. R. Vallino (1996a), "Affine Object Representations for
Calibration-Free Augmented Reality," In Proceedings of 1996 IEEE Virtual Reality
Annual International Symposium, pages 25-36, 1996a.
Kutulakos, K. N. and J. R. Vallino (1996b), "Non-Euclidean Object Representations
for Calibration-free Video Overlay," In Proceedings Object Representation in
Computer Vision II. ECCV '96 International Workshop., pages 381-401, April
1996b.
Li, F., M. Brady and C. Wiles (1996), "Fast Computation of the Fundamental Matrix
for an Active Stereo Vision System," In Proceedings of the Fourth European
Conference on Computer Vision, pages 157-166, 1996.
Lorensen, W., H. Cline, C. Nafis, R. Kikinis, D. Altobelli and L. Gleason (1993),
"Enhancing Reality in the Operating Room," In Proceedings of the 1993 IEEE
Visualization Conference, pages 410-415, 1993.
Manhart, P. K., R. J. Malcolm and J. G. Frazee (1993), "'Augeye': A Compact, Solid
Schmidt Relay for Helmet Mounted Displays," In Proceedings 1993 IEEE Virtual
Reality Annual International Symposium, pages 234-245, 1993.
Mark, W. R., S. C. Randolph, M. Finch, J. M. V. Verth and R. M. T. II (1996),
"Adding Force Feedback to Graphics Systems: Issues and Solutions," In
Proceedings of the 1996 Symposium on Interactive 3D Graphics, pages 447-452,
1996.
McLauchlan, P. F. and D. W. Murray (1995), "A unifying framework for structure and
motion recovery from image sequences," In Proceedings of the 5th IEEE
International Conference on Computer Vision, pages 314-320, 1995.
McLauchlan, P. F. and D. W. Murray (1996), “Active Camera Calibration for a Head-
Eye Platform Using the Variable State-Dimension Filter,” IEEE Transactions on
Pattern Analysis and Machine Intelligence, 18(1):15-21.
Mellor, J. P. (1995a), Enhanced Reality Visualization in a Surgical Environment,
Masters thesis, AI Lab, Massachusetts Institute of Technology.
Mellor, J. P. (1995b), "Realtime Camera Calibration for Enhanced Reality," In
Proceedings of Computer Vision, Virtual Reality, and Robotics in Medicine '95
(CVRMed '95), pages 471-475, 1995b.
Metzger, P. J. (1993), "Adding Reality to the Virtual," In Proceedings of the IEEE
1993 Virtual Reality Annual International Symposium, pages 7-13, 1993.#p#分页标题#e#
Milgram, P. and F. Kishino (1994), “A Taxonomy of Mixed Reality Visual Displays,”
IEICE Transactions on Information Systems, E77-D(12):1321-1329.
Milgram, P., H. Takemura, A. Utsumi and F. Kishino (1994), "Augmented Reality: A
Class of Displays on the Reality-Virutality Continuum," In Proceedings SPIE Vol.
2351: Telemanipulator and Telepresence Technologies, pages 282-292, 1994.
91
Milgram, P., S. Zhai, D. Drascic and J. J. Grodski (1993), "Applications of
Augmented Reality for Human-Robot Communications," In Proceedings of 1993
IEEE/RSJ International Conference on Intelligent Robots and Systems, pages 1467-
1476, 1993.
Mine, M. R., F. P. Brooks and C. H. Sequin (1997), "Moving objects in space:
exploiting proprioception in virtual-environment interaction," In Proceedings of 24th
International Conference on Computer Graphics and Interactive Techniques, pages
19-26, August 1997.
Mohr, R., B. Boufams and P. Brand (1993), "Accurate projective reconstruction," In
J. L. Mundy, A. Zisserman and D. Forsyth, editors, Applications of Invariance in
Computer Vision, 257-276: Springer-Verlag.
National Association of Broadcasters (1994), "Princeton Electronic Billboard
Develops "Virtual Arena" Technology for Television,", National Association of
Broadcasters, April 18, 1994 1994.
Neumann, U. and Y. Cho (1996), "A Self-Tracking Augmented Reality System," In
Proceedings of ACM Symposium on Virtual Reality Software and Technology,
pages 109-115, July 1996.
Neumann, U. and Y. Cho (1997), Video See-through Self-tracking Augmented Reality
(STAR). http://tracker.usc.edu/~ykcho/star.html (Current as of January 1998).
Newman, W. and R. Sproull (1973), Principles of Interactive Computer Graphics,
New York: McGraw-Hill.
Patel, V. V., M. W. Vannier, J. L. Marsh and L.-J. Lo (1996), “Assessing craniofacial
surgical simulation,” IEEE Computer Graphics and Applications, 16(1):46-54.
Polhemus Corporation (1996), Polhemus Trackers. http://www.together.com
/trackres/ourprod.html (Current as of 21 April 1996).
Pyros, G. G. and B. N. Goren (1995), “Desktop Motion Image Processing for
Episodic Television,” Advanced Imaging, 10(7):30-34.
Rastogi, A., P. Milgram and J. J. Grodski (1995), Augmented Telerobotic Control: a
visual interface for unstructured environments. http://vered.rose.utoronto.ca/people
/anu_dir/papers/atc/atcDND.html (Current as of January 1998).
Roland, J. P., R. L. Holloway and H. Fuchs (1994), "A comparision of optical and
video see-through head-mounted displays," In Proceedings SPIE Vol. 2351:
Telemanipulator and Telepresence Technologies, pages 293-307, 1994.
Rosen, J. M., D. R. Laub, S. D. Pieper, A. M. Mecinski, H. Soltanian, M. A.
McKenna, D. Chen, S. L. Delp, J. P. Loan and C. Basdogan (1996), "Virtual Reality#p#分页标题#e#
and Medicine: From Training Systems to Performing Machines," In Proceedings of
the IEEE 1996 Virtual Reality Annual International Symposium, pages 5-13, 1996.
92
Shapiro, L., A. Zisserman and M. Brady (1995), “3D Motion Recovery via Affine
Epipolar Geometry,” International Journal of Computer Vision, 16(2):147-182.
Shashua, A. (1993), "Projective Depth: A Geometric Invariant for 3D Reconstruction
from Two Perspective/Orthographic Views and For Visual Recognition," In
Proceedings 1993 IEEE International Conference on Computer Vision, pages 583-
590, 1993.
Sims, D. (1994), “New Realities in Aircraft Design and Manufacture,” IEEE
Computer Graphics and Applications, 14(2):91.
Srinivasan, M. A. and C. Basdogan (1997), “Haptics in virtual environments:
taxonomy, research status, and challenges,” Computers & Graphics, 21(4):393-404.
State, A., D. T. Chen, C. Tector, A. Brandt, H. Chen, R. Ohbuchi, M. Bajura and H.
Fuchs (1994), "Case Study: Observing a Volume Rendered Fetus within a Pregnant
Patient," In Proceedings of the 1994 IEEE Visualization Conference, pages 364-
368, 1994.
State, A., G. Hirota, D. T. Chen, W. F. Garrett and M. A. Livingston (1996),
"Superior augmented reality registration by integrating landmark tracking and
magnetic tracking," In Proceedings of the ACM SIGGRAPH Conference on
Computer Graphics, pages 429-438, 1996.
Sutherland, I. E. (1963), "Sketchpad: A Man-Machine Graphical Communication
System," In Proceedings of Spring Joint Computer Conference 1963.
Taylor, R. H., J. Funda, L. Joskowicz, A. D. Kalvin, S. H. Gomory, A. P. Gueziec and
L. M. G. Brown (1996), “An overview of computer integrated surgery at the IBM
Thomas J. Watson Research Center,” IBM Journal of Research and Development,
40(2):163-183.
Thompson, W. B. and J. L. Mundy (1987), "Three-dimensional model matching from
an unconstrained viewpoint," In Proceedings of the IEEE 1987 Robotics and
Automation Conference, pages 208-220, 1987.
Tomasi, C. and T. Kanade (1992), “Shape and motion from image streams under
orthography: A factorization method,” International Journal of Computer Vision,
9(2):137-154.
Tsai, R. Y. (1987), “A versatile camera calibration technique for high-accuracy 3D
machine vision metrology using off-the-shelf TV cameras and lenses,” IEEE
Transactions of Robotics and Automation, RA-3(4):323-344.
Tuceryan, M., D. S. Greer, R. T. Whitaker, D. E. Breen, C. Crampton, E. Rose and K.
H. Ahlers (1995), “Calibration Requirements and Procedures for a Monitor-Based
Augmented Reality System,” IEEE Transactions on Visualization and Computer
Graphics, 1(3):255-273.
93
Uenohara, M. and T. Kanade (1995), "Vision-Based Object Registration for Real-#p#分页标题#e#
Time Image Overlay," In N. Ayache, editor, Computer Vision, Virtual Reality and
Robotics in Medicine: CVRMed '95, 14-22. Berlin: Springer-Verlag.
Ullman, S. and R. Basri (1991), “Recognition by Linear Combinations of Models,”
IEEE Transactions on Pattern Analysis and Machine Intelligence, 13(10):992-
1006.
UNC - Chapel Hill (1995), Augmented Reality. http://www.cs.unc.edu
/Research/graphics/graphics.html (Current as of January 1998).
UNC - Chapel Hill (1997), UNC Ultrasound Research. http://www.cs.unc.edu/~us/
(Current as of January 1998).
Urban, E. C. (1995), “The Information Warrior,” IEEE Spectrum, 32(11):66-70.
Ware, C., K. Arthur and K. S. Booth (1993), "Fish Tank Virtual Reality," In
Proceedings of InterCHI 93 Conference on Human Factors in Computing Systems,
pages 37-42, 1993.
Welch, R. B. (1978), Perceptual Modification: Adapting to Altered Sensory
Environments, New York: Academic Press.
Wiles, C. and M. Brady (1996), "On the Appropriateness of Camera Models," In
Proceedings of the Fourth European Conference on Computer Vision, pages 228-
237, 1996.
Wloka, M. M. and B. G. Anderson (1995), "Resolving Occlusion in Augmented
Reality," In Proceedings 1995 Symposium on Interactive 3D Graphics, pages 5-12,
1995.
Wren, C. R., A. Azarbayejani, T. Darrell and A. P. Pentland (1997), “Pfinder: realtime
tracking of the human body,” IEEE Transactions on Pattern Analysis and
Machine Intelligence, 19(7):780-785.
Yokokohji, Y., R. L. Hollis and T. Kanade (1996), ""What You can See Is What You
can Feel" - Development of a Visual/Haptic Interface to Virtual Environments," In
Proceedings of the IEEE 1996 Virtual Reality Annual International Symposium,
pages 46-53, 30 March - 3 April 1996.
Ziegler, R. (1996), "Haptic Displays - How we can feel Virtual Environments," In
Proceedings SPIE Vol. 2949: Imaging Sciences and Display Technologies, pages
221-232, 7-10 October 1996.
Ziegler, R., C. Brandt, C. Kunstmann, W. Müller and H. Werkhäuser (1997), "Haptic
Display of the VR Arthroscopy Training Simulator," In Proceedings SPIE Vol.
3012: Stereoscopic Displays and Virtual Reality Systems IV, pages 479-486, 11-14
February 1997.
94
Zikan, K., W. D. Curtis, H. A. Sowizral and A. L. Janin (1994), "A note on dynamics
of human head motions and on predictive filtering of head-set orientations," In
英国留学生科技哲学dissertation定制Proceedings of SPIE Vol. 2351: Telemanipulator and Telepresence Technologies,
pages 328-336, 1994.
Zorpette, G. (1994), “An eye-popping summer,” IEEE Spectrum, 31(10):19-22.